Quick Reference Guide

SCRAM Remote Breath Pro
Quick Reference Guide
6
To disinfect a SCRAM Remote Breath Pro device using any of
these products:
1. Spray SCRAM-approved alcohol-free disinfectant (see
previous page) onto a cloth and wipe the entire device
down, including the device's power supply. Allow the
solution to sit on the device for 10-15 minutes before
wiping it dry.
2. Spray alcohol-free disinfectant onto a cloth and gently
work the cloth into the breath-tube interface to disinfect
and remove any additional condensation that may be
present.
3. Discard any used carrying cases and breath tubes that
are returned by the client. New cases and breath tubes
are in stock and available to order directly from SCRAM
Systems.
Biohazard Disposal Information
If you feel a piece of SCRAM equipment may pose a specic
health hazard, minimize the number of people who come into
contact with the device and follow your individual state and
or local laws for disposal of biohazard materials or devices
containing L-ion or Li-polymer batteries.
Contact SCRAM Systems Customer Service at
[phone] or [e-mail] with the serial
number of the device being removed and/or decremented from
your inventory.
DO NOT return the device to SCRAM Systems.