Quick Reference Guide

SCRAM Remote Breath Pro

Client Discharge

Check-in Device

Scan the QR code or visit https://help.scramnetwork.com/

documentation/remote-breath/client-discharge/ for detailed

instructions. (SCRAMNET login required)

1. Access the client's Equipment page in SCRAMNET.

2. Select the Stop Monitoring button and complete the

wizard to check-in the old device.

3. Wake up the old device being replaced.

4. Once the screen on the device displays "Device

Unassigned," refresh the Equipment page. The old

device is no longer visible on the page.

Clean and Disinfect the Device

To avoid damaging SCRAM equipment, use only cleaning

and disinfecting products approved by SCRAM Systems as

listed below. NEVER USE CITRUS/PINE-BASED CLEANING

PRODUCTS OR ALCOHOL AND/OR ALCOHOL-CONTAINING

CLEANING PRODUCTS.

Approved Products

• Sporicidin® Disinfectant (USA)

• SporeClear™ Disinfectant (outside of USA)

• Windex® Multi surface Disinfectant Cleaner (yellow

Windex)