Quick Reference Guide

SCRAM CAM
Quick Reference Guide
2
INITIAL SCRAM CAM/SCRAM CAM+HA
C
LIENT SETUP
ADD NEW CLIENT IN SCRAMNET
1. Enter the agency managing the client and click the Add a New
Client button.
2. Enter required information in the following sections:
• Personal Information
• Contact Information
Employment (if known, provided detailed work environment
information)
• Court Information
• Additional Information
3. Click the Add New Client button.
4. Select the ‘CAM’ or ‘CAM + House Arrest’ option in the Monitoring
Type drop-down list.
5. For a CAM+House Arrest (CAM+HA) client, enter/select all
required information.
6. Click the Complete Change Monitoring button.
ASSIGN SCRAM EQUIPMENT - CAM CLIENT
The following procedure applies to those clients being monitored for
CAM only using SCRAM equipment.
BEFORE MEETING CLIENT
Perform the following steps shortly before meeting with the client.
1. If you have the client’s information available, enter that
information into SCRAM
NET using the Add New Client page.
2. Ensure that the wired or wireless SCRAM Wireless Base Station is
fully charged.
3. Install the SCRAM CAM Bracelet components.
WHEN CLIENT ARRIVES
Perform the following steps when the client arrives at the initial
meeting.
1. Determine the communication method.
Cellular/WI-FI
The wireless SCRAM Base Station allows data to be quickly
uploaded to SCRAM
NET using either cellular or WI-FI services.
Internet Service
To use the ethernet port on the base station, using the proper
tool such as needle-nose pliers, carefully remove the clear, plastic