Instruction manual

LIMITED WARRANTIES
Tooling Warranty: Huck warrants that tooling and
other items (excluding fasteners, and hereinafter
referred as "other items") manufactured by Huck shall
be free from defects in workmanship and materials
for a period of ninety (90) days from the date of
original purchase.
Warranty on "non standard or custom
manufactured products": With regard to non-
standard products or custom manufactured products
to customer's specifications, Huck warrants for a
period of ninety (90) days from the date of purchase
that such products shall meet Buyer's specifications,
be free of defects in workmanship and materials.
Such warranty shall not be effective with respect to
non-standard or custom products manufactured using
buyer-supplied molds, material, tooling and fixtures
that are not in good condition or repair and suitable
for their intended purpose.
THERE ARE NO WARRANTIES WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE
HEREOF. HUCK MAKES NO OTHER
WARRANTIES AND EXPRESSLY DISCLAIMS ANY
OTHER WARRANTIES, INCLUDING IMPLIED
WARRANTIES AS TO MERCHANTABILITY OR AS
TO THE FITNESS OF THE TOOLING, OTHER
ITEMS, NONSTANDARD OR CUSTOM
MANUFACTURED PRODUCTS FOR ANY
PARTICULAR PURPOSE AND HUCK SHALL NOT
BE LIABLE FOR ANY LOSS OR DAMAGE,
DIRECTLY OR INDIRECTLY, ARISING FROM THE
USE OF SUCH TOOLING, OTHER ITEMS,
NONSTANDARD OR CUSTOM MANUFACTURED
PRODUCTS OR BREACH OF WARRANTY OR
FOR ANY CLAIM FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Huck's sole liability and Buyer's exclusive remedy for
any breach of warranty shall be limited, at Huck's
option, to replacement or repair, at FOB Huck's plant,
of Huck manufactured tooling, other items,
nonstandard or custom products found to be
defective in specifications, workmanship and
materials not otherwise the direct or indirect cause of
Buyer supplied molds, material, tooling or fixtures.
Buyer shall give Huck written notice of claims for
defects within the ninety (90) day warranty period for
tooling, other items, nonstandard or custom products
described above and Huck shall inspect products for
which such claim is made.
Tooling, Part(s) and Other Items not
manufactured by Huck.
HUCK MAKES NO WARRANTY WITH RESPECT
TO THE TOOLING, PART(S) OR OTHER ITEMS
MANUFACTURED BY THIRD PARTIES. HUCK
EXPRESSLY DISCLAIMS ANY WARRANTY
EXPRESSED OR IMPLIED, AS TO THE
CONDITION DESIGN OPERATION
MERCHANTABLITY OR FITNESS FOR USE OF
ANY TOOL, PART(S), OR OTHER ITEMS
THEREOF NOT MANUFACTURED BY HUCK.
HUCK SHALL NOT BE LIABLE FOR ANY LOSS
OR DAMAGE, DIRECTLY OR INDIRECTLY,
ARISING FROM THE USE OF SUCH TOOLING,
PART(S) OR OTHER ITEMS OR BREACH OF
WARRANTY OR FOR ANY CLAIM FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
The only warranties made with respect to such tool,
part(s) or other items thereof are those made by the
manufacturer thereof and Huck agrees to cooperate
with Buyer in enforcing such warranties when such
action is necessary.
Huck shall not be liable for any loss or damage
resulting from delays or nonfulfillment of orders owing
to strikes, fires, accidents, transportation companies
or for any reason or reasons beyond the control of
the Huck or its suppliers.
Huck Installation Equipment
Huck International, Inc. reserves the right to make
changes in specifications and design and to
discontinue models without notice.
Huck Installation Equipment should be serviced by
trained service technicians only.
Always give the Serial Number of the equipment
when corresponding or ordering service parts.
Complete repair facilities are maintained by Huck
International, Inc. Please contact one of the offices
listed below.
Eastern
One Corporate Drive Kingston, New York 12401-
0250 Telephone [phone] FAX [phone]
Canada
6150 Kennedy Road Unit 10, Mississauga, Ontario,
L5T 2J4, Canada.
Telephone [phone] FAX [phone]
Out
side USA and Canada
Contact your nearest Huck International Office, see
back cover.
In addition to the above repair facilities, there are
Authorized Tool Service Centers (ATSC's) -located
throughout the 'United States. These service centers
offer repair services, spare parts, Service Parts Kits,
Service Tools Kits and Nose Assemblies. Please
contact your Huck Representative or the nearest
Huck office listed on the back cover for the ATSC in
your area.
!""#$%&'()*+$,()*(-$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$./0&1$21-3(4*4+$,5-3(6-