Instruction manual

Huck-Spin® Series Tooling (HK1076) Alcoa Fastening Systems
27
Cylinder (continued)
35. Screw two Socket Head Cap Screws (sup-
plied with Spanner Assembly) into End Cap.
36. Unscrew Cylinder End Cap with Spanner
Assembly, sliding it over Piston and Piston
Assembly Tool, and drain fluid.
37. Remove Piston from Cylinder.
38. Remove Dump Valve and all seals from
Piston.
Tighten Screws
(one each side)
Align dowels of Spanner
Assembly with holes in End
Cap, and press in.
123607 Pin
Spanner Assembly
Pin Spanner
Assembly
and End Cap
Piston and
Piston Assembly Tool
Dump
Valve
Cylinder
Figure 28
D
D
ISASSEMBLY
ISASSEMBLY
(
(
CONTINUED
CONTINUED
)
)