Instruction manual
Huck-Spin® Series Tooling (HK1076) Alcoa Fastening Systems
11
Power
Switch
Timer Codes
590434
Error Codes
Timer 1 - Spin ON to LS1
Timer 2 - Spin ON from LS1 to LS2
Timer 3 - Swage or Snub time (LS2 to Pressure)
Timer 4 - Delay after Hyd. Press. Off to Spin Off
Timer 5 - Start Spin Off to LS1 Open
Timer 6 - Spin On after Snub
Timer 7 - Hold Time
Timer 8 - Spin Off after LS1 Opens
F1
MENU
F2
DIGIT
SELECT
F3
DIGIT
CHANGE
F4
DIGIT
SELECT
TRIGGER
LIMIT SWITCH 1
LIMIT SWITCH 2
TOOL CONNECTED
PRESSURE
HuckSpin
Trig Rlsd Early - Trigger released BEFORE swage complete
-TD-1 Timed out - LS1 NOT reached during Spin ON
-TD-2 Timed out - LS1 NOT reached, go to snub
-TD-3 Time out SN - Pressure NOT reached during Snub
-TD-4 Time out SW - Pressure NOT reached during Swage
-TD-5 Timed out - LS1 NOT Released during spin Off
-TD-6 Timed out - LS2 NOT Made after Snub
-Check Transducer - Transducer NOT connected or FAULTY
-Thimble Cnt. Max. - MAX thimble count has been reached
-Anvil Cnt. Max. - MAX anvil count has been reached
TURN OFF POWER BEFOR
E
DISCONNECTING POWE
R
SUPPLY CABLE
OFF ON
Figure 5
These pressures are for Low Swage
Anvils, which can be identified by a
step on the inside bore. Previous
designs of anvils have a straight bore
without any steps and will require high-
er pressures.
These pressure values are only a start-
ing point for setting the Powerig. Many
factors will cause these pressures to be
higher or lower which can include: tool
condition, hose length, oil temperature
and fasteners being installed.
P
P
RESSURE
RESSURE
S
S
ETTINGS
ETTINGS
Fastener Size Nose Style Tool Notes
HS -8 (1/4") 99-7300 Installation - Long HS7 ------------------
HS -10 (5/16") 99-7301 Installation - Standard HS7 ------------------
HS -10 (5/16") 99-7304 Installation - Long HS7 ------------------
HS -12 (3/8") 99-7302 Installation - Standard HS7 ------------------
HS -12 (3/8") 99-7303 Installation - Long HS7 ------------------
HS -10 (5/16") 99-7506 Installation - Standard 2580 ------------------
HS -10 (5/16") 99-7506CC Removal 2580 ------------------
HS -12 (3/8") 99-7609 Installation - Short HSSFT-M10 ------------------
HS -12 (3/8") 99-7610 Installation - Long HSSFT-M10 ------------------
SmallDiameterHuckSpin(Inch)
Fastener Size Nose Style Tool Notes
HS 12mm 99-7430 Installation - Long HS24 ------------------
HS 16mm 99-7331 Installation - Long HS24 ------------------
HS 12mm 99-7412-1 Installation - Standard HS37 ------------------
HS 14mm 99-7414-1 Installation - Standard HS37 ------------------
HS 14mm 99-7416-1 Installation - Short HS37 ------------------
HS 12mm 99-7413-1 Installation - Standard HS52 ------------------
HS 14mm 99-7415-1 Installation - Standard HS52 ------------------
HS 14mm 99-7561CC Removal HS52 ------------------
HS 16mm 99-7315-1 Installation - Standard HS52 ------------------
HS 16mm 99-7551CC Removal HS52 ------------------
HS 16mm 99-7316-1 Installation - Short HS52 ------------------
HS 16mm 99-7317-1 Installation - Long HS52 ------------------
HS 16mm 99-7318-1 Installation - Extra Long HS52 ------------------
HS 20mm 99-7418-1 Installation - Standard HS52 ------------------
HS 20mm 99-7562CC Removal HS52 ------------------
HS 12mm 99-7700 Installation HSSFT-M12 ------------------
HS 14mm 99-7702 Installation - Standard HSSFT-M16 ------------------
HS 14mm 99-7702-4 Installation - Long HSSFT-M16 ------------------
HS 16mm 99-7602 Installation - Standard HSSFT-M16 ------------------
HS 16mm 99-7602CC Removal HSSFT-M16 ------------------
HS 16mm 99-7602-5 Installation - Long HSSFT-M16 ------------------
HS 12mm 99-7510 Installation - Standard 2624HS/3585PT ------------------
HS 12mm 99-7510CC Removal 2624HS/3585PT ------------------
HS 14mm 99-7511 Installation - Standard 2624HS/3585PT ------------------
HS 14mm 99-7511CC Removal 2624HS/3585PT ------------------
HS 16mm 99-7501 Installation - Standard 2624HS/3585PT ------------------
HS
16
99 7501CC
Rl
2624HS/3585PT
LargeDiameterHuckSpin(Metric)
HS 16mm 99-7501CC Removal 2624HS/3585PT ------------------
HS 20mm 99-7512 Installation - Standard 2624HS/3585PT ------------------
HS 20mm 99-7512CC Removal 2624HS/3585PT ------------------
Fastener Size Nose Style Tool Notes
HS -16 (1/2") 99-7330 Installation - Long HS24 ------------------
HS -20 (5/8") 99-7331 Installation - Long HS24 ------------------
HS -16 (1/2") 99-7312-1 Installation - Standard HS37 ------------------
HS -16 (1/2") 99-7307-1 Installation - Long HS37 ------------------
HS -16 (1/2") 99-7308-1 Installation - Short HS52 ------------------
HS -16 (1/2") 99-7309-1 Installation - Long HS52 ------------------
HS -16 (1/2") 99-7306-1 Installation - Standard HS52 HS37 DIA ANVIL
HS -16 (1/2") 99-7313-1 Installation - Standard HS52 ------------------
HS -16 (1/2") 99-7550CC Removal HS52 ------------------
HS -20 (5/8") 99-7315-1 Installation - Standard HS52 ------------------
HS -20 (5/8") 99-7551CC Removal HS52 ------------------
HS -20 (5/8") 99-7316-1 Installation - Short HS52 ------------------
HS -20 (5/8") 99-7317-1 Installation - Long HS52 ------------------
HS -20 (5/8") 99-7318-1 Installation - Extra Long HS52 ------------------
HS -24 (3/4") 99-7314-1 Installation - Standard HS52 ------------------
HS -24 (3/4") 99-7553CC Removal HS52 ------------------
HS -32 (1") 99-7321 Installation - Short HS52 ------------------
HS -32 (1") 99-7322 Installation - Standard HS52 ------------------
HS -32 (1") 99-7323 Installation - Short HS52 HS Pin & BT Collar
HS -16 (1/2") 99-7600 Installation - Standard HSSFT-M12 ------------------
HS
-20 (5/8") 99-7602 Installation - Standard HSSFT-M16 ------------------
HS
-20 (5/8") 99-7602CC Removal HSSFT-M16 ------------------
HS
-20 (5/8") 99-7602-5 Installation - Standard HSSFT-M16 ------------------
HS -16 (1/2") 99-7500 Installation - Standard 2624HS/3585PT ------------------
HS -16 (1/2") 99-7500CC Removal 2624HS/3585PT ------------------
HS -20 (5/8") 99-7501 Installation - Standard 2624HS/3585PT ------------------
LargeDiameterHuckSpin(Inch)
HS -20 (5/8") 99-7501CC Removal 2624HS/3585PT ------------------
HS -24 (3/4") 99-7503 Installation - Standard 2624HS/3585PT ------------------
HS -24 (3/4") 99-7503CC Removal 2624HS/3585PT ------------------