Owner's Manual

Keyboard Controls

How to Drive

W/S = Reverser

A/D = Throttle

´/; = Train Brake

/ = Handbrake

[/] = Locomotive Brake

Z = Start Up / Shut Down

B = Bell

H = Headlights On

H + Shift = Headlights O󰀨

L = Cablight

V = Forward Wipers

Backspace = Emergency Brake

Space Bar = Horn

X = Sander

The ALCo DL 109 is easy to drive. Once in game, the engine is ON by default. To

start moving it do the following steps:

1) Set the Reverser forwards or backwards.

2) Release Loco brake if the locomotive is light or Train brake if the locomotive is

coupled to a consist.

3) Move up the Throttle. Depending on the consist it might need more power to

move the train.

4) Use brakes levers to stop the train. Loco brake if you are operating a light engine

or Train brake if you are operating a consist.

To operate the train with simple controls is even easier. You only have to worry

about two controls. Reverser button and Throttle/brake lever. Reverser is usually

set to forwards and can be changed with a single click on it. To move the train just

move up the Throttle/Brake lever from the brake area, the bottom half, to the power

area, the top half. Move it down to the brake area to stop the train.