User's Manual

Troubleshooting Tips
System will not turn on
• Check power cord for a secure connection.
• Unplug the unit for a moment, and then plug
into power source again.
• Check the outlet by plugging in another
device.
No sound
• Increase the volume setting.
• Check connection to speakers.
• Check that you have selected the appropriate
function: CD, TUNER, LINE IN/AUX or BT.
• Make sure mute is off .
• Make sure headphones are not plugged in.
Poor radio reception
• Check antenna connection.
• Move antenna.
• Turn off nearby electrical appliances, such
as hair dryer, vacuum cleaner, microwave,
fl uorescent lights.
CD does not play
• Check that CD is in the tray.
• Check that CD label is facing up.
• Check that PAUSE mode is not on.
• Check that CD function is selected.
• Use CD lens cleaner.
• Clean the disc.
• Try another CD.
CD sound skips
• Clean the disc.
• Check disc for warping, scratches, or other
damage.
• Check if something is causing the system to
vibrate. If so, move the system.
• Make sure the speakers are at least 3 feet away
or on a diff erent surface from the main unit.
CD button will not respond, or does not change
discs when you press DISC SKIP
• Switch to another function (TUNER, LINE IN/
AUX or BT) and then back to CD.
Remote control does not work
• Check that the batteries are properly installed.
• Replace weak batteries.
• Check the system is plugged into power
source.
• Point the remote directly at the system’s front
panel.
• Move closer to the system.
• Remove any obstacles between the remote
and the system.
- 11 -