User manual 500W 5-CD Mini System with Bluetooth Receiver CD2965SB It's important to read this instruction prior to using your new product for the first time.
Safety Precautions THE LIGHTNING FL ASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF "DANGEROUS VOLTAGE" INSIDE THE PRODUCT. SEE MARKING ON BOTTOM / BACK OF PRODUCT CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Caution: This product utilizes a laser.
IMPORTANT SAFETY INSTRUCTIONS Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • D o n o t b l o c k a ny ve n t i l a t i o n o p e n i n g s. Install in accordance with the manufacturer’s instructions.
Important Information Precautions • This unit uses a laser to read the music on the disc. The laser mechanism corresponds to the cartridge and stylus of a record player. Although this product incorporates a laser p i ck- u p l e ns , i t is co m p l e te l y s a f e w h e n operated according to directions. • Discs rotate at high speed inside the player. Do not use damaged, warped, or cracked discs. • D o n o t t o u c h t h e p i c k- u p l e n s w h i c h i s located inside the disc compartment.
Getting Started Unpacking the system You should have the following: • one main unit (with three speakers) • one remote control • one AM loop antenna • user manual Using FM and AM antennas Before you use your audio system, you’ll want to make sure both the FM and AM antennas are positioned properly. Uncoil the FM antenna at the back of the unit, making sure it is fully extended (you may even want to tape it to the wall behind the unit if possible, the higher the better). Connections Back view 1.
Unit Controls Main Unit 1 9 2 3 4 5 10 11 12 6 13 7 14 8 1. Power indicator – Illuminates when the unit is in standby. Bluetooth indicator 2. POWER – To turn power on or off (STANDBY mode). 3. TIMER – To turn the timer on/off; press and hold to enter the timer setting mode. 4. CLOCK – To show time and enter clock setting mode. 5. AUTO PROG / BAND – To auto-preset radio stations in FM mode; To toggle between AM and FM. SOURCE – To select among CD player, TUNER, LINE IN and AUX sources.
Remote Control Remote control 11 1 2 3 12 13 14 15 4 5 6 16 17 18 19 7 8 9 20 21 10 22 1. TUNER – To select the tuner and change the radio band. 2. CD – To select the CD player. 3. I N F O – To s e l e c t a m o n g d i s c d i s p l a y information. 4. – To turn power on or off (STANDBY mode). – To select the bluetooth mode. 12. LINE IN / AUX – To select the external sound input from LINE IN jack or AUX IN jacks. 13. BASS – To turn BASS on or off. 14. DIMMER – To adjust display brightness. 5.
Display CD tray status: Lights when loaded Flashes for the current disc Animates when playing Source indication Radio bands Playback mode status Timer activated BASS – bass boost activated PROG – program playback mode activated SLEEP – sleep mode activated STEREO – FM stereo mode activated EQ – preset equalizer activated Display brightness 1. Press and hold DIMMER for more than 2 seconds. 2. While “DIM 1” is displayed, press DIMMER repeatedly to select the desired level (DIM 1–3).
Clock and Timer Setting the clock 1. Press and hold CLOCK until the hour flashes on the display. 2. Press / to set the hour and then press CLOCK to shift to minute digits. / to set the minute. 3. Press 4. Press CLOCK to save settings. • When system is ON, you can tap CLOCK to display the current time – it will display time for about 2 seconds. • When the system is OFF (standby), the display will turn off to save power. Activating the timer Tap TIMER to turn on/off the timer.
CD Playback CD-R / RW This unit is compatible with CD-RW/ CD-R discs for playback. Notes on CD-R/RW Disc: • Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning. • To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is being read. • Do not load an unrecorded CD-R/RW disc into the unit. This may take a longer time to read the disc.
Radio Bluetooth Pairing Press SOURCE or TUNER on the remote control to select TUNER. Selecting tuner band Press AUTO PROG / BAND on the unit or TUNER on the remote control to select between AM and FM radio bands. Tuning to a station Press / to select frequencies. Press and hold to start auto searching for the next available station. Presetting stations Manually setting presets 1. Press / to access the desired frequency. 2. Press PROG button.
Troubleshooting Tips System will not turn on • Check power cord for a secure connection. • Unplug the unit for a moment, and then plug into power source again. • Check the outlet by plugging in another device. No sound • Increase the volume setting. • Check connection to speakers. • Check that you have selected the appropriate function: CD, TUNER, LINE IN/AUX or BT. • Make sure mute is off. • Make sure headphones are not plugged in.
Additional Information Disconnect the audio system from the power source before performing any maintenance. Cleaning Clean the exterior of the system using a soft dust cloth. CD Player CAUTION! This system operates with a laser. It must be opened by only a qualified technician. Technical specifications Power supply: 120V~60Hz The descriptions and characteristics given in this document are given as a general indication and not as a guarantee.
