User's Manual

ManualsBrandsAlco Electronics ManualsElectronicsCD Music System

CD PLAYBACK RANDOM PLAYBACK

PRESET EQ

SLEEP TIMER SETTING

TROUBLESHOOTING GUIDETIMER SETTING

PROGRAMMABLE CD PLAYBACK

REPEAT PLAYBACK

1. Press the STANDBY/ON button to turn the unit on.

2. Press the OPEN knob to open the CD door. Place a disc in the center with the

label side up and then close the CD door gently.

3. Press the FUNCTIONbuttontoCDmodeand“--”isshownonthedisplay.

Then the total track no. is shown on the display.

4. Pressthe PLAY/PAUSE button to start playing.

• Adjustthevolume.

To Pause Playback

• Pressthe PLAY/PAUSE button.

• Toresumeplayback,pressthe

PLAY/PAUSE button again.

To Stop Playback

• Pressthe STOP button.

Skipping to Another Track

• Presseitherthe or button according to the desired direction.

Press the

button to skip to the start of the current track or skip to previous

tracks. Press the buttontoskiptothebeginningofthenexttrack.

Locating a Particular Point on a Track

• Keepeithertheorbuttonpressedduringplayback,accordingtothedesired

direction, and release at the desired point.

All tracks on the disc can be played in random order (Using the remote control

only).

Random Playback

• PresstheRANDOMbutton ontheremotecontroluntil“  ” appearsonthe

display. All tracks will be played randomly.

After all tracks have played, the unit will stop automatically.

Cancel Random Playback

• Pressthe RANDOMbuttonontheremotecontroluntil“ ”disappears.The

unit will return to normal playback.

This system supports a variety of equalizers and sound eects.

During playback, press the PRESET EQ button to select a desired music mode.

Each time the PRESET EQ button is pressed, the music mode will be changed to

thenextoneasfollows:

The sleep timer automatically turns the unit o at a certain time.

1. While the unit is on, press the SLEEPbuttonontheremotecontroland“00”

appears on the display.

2. Press the SLEEP button repeatedly to select the desired sleep time as below:

3. Aftersettingadesiredsleeptime,the“

“appearsonthedisplay.

4. Theunitwillautomaticallyturnoonceitreachesthesleeptime.

• ToclearthepresetsleeptimepresstheSLEEP button on the remote control to

select“ “andthe“ “disappearsonthedisplay.

The timer function will turn the unit on at a preset time.

TO SET TIMER

1. In standby mode, press and hold the TIMER button on the remote control until

the TIMER indicator blinks.

2. Press the

/ button to adjust the desired hours and press the TIMER

button once to conrm, then the minute digits blink.

3. Press the

/ button to adjust the desired minutes and press the TIMER

button once to conrm, then the TUNER indicator blinks.

4.Pressthe / buttontochoosetheunitwillwakeupto“CD”or“RADIO”

when the timer reaches the preset time, then press the TIMER button once to

conrm.

5. Press the / button to adjust the volume, then press the TIMER button

oncetoconrm.The“TIMER”indicatorstopsblinkingandremainson.

• ForRADIOalarm,rsttuneintoadesiredstation.

• ForCDalarm,rstpresstheCDbuttontoCDmodeandinsertoneCDintothe

unit.

TO CANCEL TIMER

• PresstheTIMERbuttonontheremotecontroltwiceandthe“TIMER”indicator

goes out.

Aprogramofupto20trackscanbesettoplayinapresetorder.

1. In CD stop mode, press the

/PROG/MEMbuttonandthe“MEM”&“ ”

will blink on the display.

2. Press the or button to select the desired track and press the /PROG/

MEM button to store the track in memory.

3.Toaddadditionaltracks,repeatstep2(upto20tracks).

4.Tostartplayback,pressthe PLAY/PAUSE button.

To check the program:

• Press the

PLAY/PAUSE button and the button. Each time the

button is pressed, the track number appears on the display.

To change the programmed tracks during program playback:

• Press the

STOP button and press the PROG/MEM button repeatedly to

search the program number, then press either the or button to select

the desired track. Press the /PROG/MEM button again to register the newly

selected track into program.

To erase the whole program, do one of the following:

• Pressthe

FUNCTION button to the other mode.

• Pressthe STOP button and open the CD door.

Repeat Current Track

• Pressthe /MEM.UPbuttonuntil“ ”blinksonthedisplay.Thecurrent

track will be played repeatedly.

Repeat the Entire CD

• Pressthe /MEM.UPbuttonuntil“ ”stopsblinkingandremainson.All

tracks will be played repeatedly.

Cancel Playback Mode

• Pressthe /MEM.UPbuttonuntil“ ”disappears.

The unit can be paired and connected to the Bluetooth® enabled devices such

as a smart phone.

Note : You must disconnect the LINE IN cable and device from the unit when you

are ready to pair and connect your Bluetooth®

device.

PLAYBACK VIA BLUETOOTH

ENABLED DEVICES PLAYBACK VIA BLUETOOTH

ENABLED DEVICES

INITIAL DEVICE PAIRING AND CONNECTION

In order to pair and connect your Bluetooth® device for the rst time:

1. Press the STANDBY/ON button to turn on the unit. Press the FUNCTION

buttontoBluemodeand“ ”isshownonthedisplay.

The Bluetooth

indicatorlightglowsblueandasheswhichmeanstheunitis

in Bluetooth® mode and ready to pair.

2. Turn on the Bluetooth® device you wish to pair and connect.

3. Press and hold the PAIR button on the unit for 3 seconds. The Bluetooth®

indicatorlightwillstartashingrapidlywhichmeansitispairing.

4. On your Bluetooth® enabled device, search for the “RS2929B” in the list of

discovered devices and select it.

It may take the unit and Bluetooth® enabled device a few seconds to pair.

5. When the Bluetooth® indicator glows a solid blue, the unit and the Bluetooth®

enabled device are now paired and connected.

6. You can now enjoy audio from the unit.

Notes:

• If your Bluetooth device (e.g. Smart phone etc.) need the PIN code while

pairing,pleaseenter4-digitnumber:0000.

• TheunitcanonlybeconnectedtooneBluetooth®deviceatatime.

RECONNECTING A BLUETOOTH

ENABLED DEVICE

Bluetooth® enabled devices must be reconnected when the device has been

turned o or the unit has been turned o.

1. Turn on the Bluetooth® device that has already been paired with the unit.

2. Press the

STANDBY/ON button to turn on the unit. Press the FUNCTION

buttontoBluemodeand“

”isshownonthedisplay.

 The Bluetooth® indicator light glows blue and starts ashing rapidly, and it

auto searches for the last paired Bluetooth® device in memory.

3. Depending on your Bluetooth® device, your device may automatically connect

to the unit.

If the device does not automatically connect to the unit, press and hold the

PAIR AND CONNECT WITH ANOTHER NEW DEVICE

In order to pair the unit to a new device, you must rst disconnect the currently

paired and connected Bluetooth® device from the unit.

1. OnthecurrentlypairedandconnectedBluetooth®device,selectthe“RS2929B”

from the list of currently paired and connected devices, and disconnect it.

Please refer to your Bluetooth® enabled device User’s Guide for direction on

how to disconnect a device.

Or turn o the Bluetooth® device.

2. Follow the Initial device pairing and connection instructions above.

PAIR button on the unit for 3 seconds until the Bluetooth® indicator light starts

ashing rapidly, then search for the “RS2929B” in its list of your Bluetooth®

devices and select it.

4. Once the Bluetooth® indicator turns a solid blue, the Bluetooth® enabled

device is paired and connected.

5. You can now enjoy audio from the unit.

SOLUTIONS

•MakesureyourBluetooth

device is working

properly.

• MakesurethesourceisBluetooth

mode.

• Checkyourdevice’smanualfordetailson

Bluetooth

pairing and linking.

•MakesureCDbuttonispressed.

•Makesuredisclabelisfacingup.

•Makesurediscisclean.

•Pausemodeisactivated.

•Discmaybedamagedordirty;checkdisc.

•Makesuretheunitisonasecurespot.Vibration

or jarring can cause the disc to skip.

•MakesureFMantennawireisfullyextended.

•Electricalinterference inyourhome cancause

poor reception. Move the unit away from them

(especially those with motors and transformers).

• Rotatetheunithorizontally.

•MakesureACadapterissecureintheoutlet,

and outlet has power.

• Makesurethecurrentmodeiscorrect.

• Makesureyou’veturnedontheconnected

device, and music are being played back.

• Checkifvolumeissettozero.

PROBLEMS

BLUETOOTH®

Bluetooth

devices doesn’t

pair with this unit.

Disc in place but unit won’t

play

Disc skips

RADIO

Poor FM reception

OTHERS

System does not turn on

No sound

Design and specications are subject to change without notice.

AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited

warrantyextendstotheoriginalconsumerpurchaserandislimitedtonon-

commercial use of the product.

One Year Parts & Labor Warranty

AVC products purchased in the United States are warranted to be free from

defects in materials or workmanship for a period of one year from the date of

their original retail purchase. If the unit fails to conform to this warranty, we will

service the product using new or refurbished parts and products, at AVC’s sole

discretion.

During a period of one year from the eective warranty date, AVC will provide,

when needed, service labor to repair a manufacturing defect at its designated

Service Center. To obtain warranty service in the United States, you must rst

call our Customer Support Center at 1-800-506-5746 or 1-877-252-6873,

during the hours listed in the box below. The determination of service will

be made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO

AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements

for defective parts or products will be used for repairs by AVC at its designated

Service Center for one year from the eective warranty date. Such replacement

parts or products are warranted for an additional one year from the date of

repair or replacement. The Customer will be required to ship the unit to the

Service Center indicated at the time Customer Support is contacted to make the

necessary repairs. The customer is responsible for all transportation charges to

the service facility.

Packaging and Shipping Instruction

When you send the product to the AVC service facility you must use the original

cartonboxandpackingmaterialoranequivalentasdesignatedbyAVC.

Your Responsibility

(1) You must retain the original sale receipt to provide proof of purchase.

(2) These warranties are effective only if the product is purchased and operated

in the U.S.A. or Canada.

(3)Warrantiesextendonlytodefectsinmaterialorworkmanship,anddo

notextendtoanyproductorpartswhichhavebeenlostordiscarded,or

damage to product or parts caused by misuse, accident, improper operation

or maintenance, or use in violation of instructions provided with the product,

or to product which has been altered or modified without authorization

of AVC, or to products or parts thereof which have had the serial number

removed or changed.

LIMITED WARRANTY LIMITED WARRANTY

Out of Warranty

In the event your product requires repair after the limited warranty period has

expired,pleasecontactourCustomerSupportCenterat

1-800-506-5746, 1-877-252-6873 or www.RCAav.com

Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm,

Saturday: 9am–NOON Eastern time.

Important: You are responsible for any transportation, shipping or insurance

relative to the return of product to our Product Returns Center.

All warranties implied by state law, including the implied warranties of

merchantabilityandtness for a particular purpose, are expressly limited to

thedurationofthelimited warranties set forth above. With the exception of

any warranties implied by state law as hereby limited, the foregoing warranty is

exclusiveandinlieuofallotherwarranties,guarantees,agreementsandsimilar

obligations of manufacturer or seller with respect to the repair or replacement

of any parts. In no event shall AVC be liable for consequential or incidental

damages.

No person, agent, distributor, dealer or company is authorized to change, modify

orextendthetermsofthesewarrantiesinanymannerwhatsoever.Thetime

within action must be commenced to enforce any obligation of AVC arising

under the warranty or under any statute, or law of the United States or any state

thereof, is hereby limited to one year from the date of purchase. This limitation

does not apply to implied warranties arising under state law.

This warranty gives you specic legal rights and you may also have other rights,

which may vary, from state to state. Some states do not allow limitation on how

longanimpliedwarrantylasts,whenanactionmaybebrought,ortheexclusion

or limitation of incidental or consequential damages, so the above provisions

may not apply to you.

For more information on other products and services, please visit our web site at

www.RCAav.com

Important: Alsokeepyour“BillofSale”asproofofpurchase.

Model no ................................................................ Product name ............................................

Type of set ............................................................. Serial no .......................................................

Invoice no .............................................................. Date purchased .........................................

Dealer name ......................................................................................................................................

FORSERVICEANDREPAIR,PLEASEVISITwww.RCAav.com

Specicationsandexternalappearancearesubjecttochangewithoutnotice.

811-692991W010