Quick Start Guide CJB18R0ALAAA
This product meets applicable national SAR limits of 2.0W/kg. The specific maximum SAR values can be found in the section of this user guide. www.sar-tick.com When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 5 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call.
Do not switch on your device when its use is prohibited or when using the device may cause interference or danger. Follow rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus. Switch off your device in an aircraft. The device may cause interference to aircraft control signals. Switch off your device near high-precision electronic devices. The device may affect the performance of these devices.
Do not place magnetic storage media near your device. Radiation from the device may erase the information stored on them. Do not subject your device to high temperatures or use it in a place with flammable gas such as a petrol station. Keep your device and its accessories away from children. Do not allow children to use your device without guidance. Only use approved batteries and chargers to avoid the risk of explosion. Observe the laws or regulations on device use.
1. Overview ALCATEL ONE TOUCH LINK Y850 is a portable wireless router, providing a simple way to share 4G with any Wi-Fi embedded device. 1.1 Package contents ●ONE TOUCH Y850 ●USB cable ●Quick start guide ●USB Wall charger ●Car Charger* ●USB Adapter* ●USB Cradle charger * Note: *depending on your region and market.
1.
1.
Note: *depending on your region and market Use the device’s 3 buttons as follows: Button Description Long press to turn on/off the device ① Power On/Off Short press to put the OLED screen in either active or sleep mode. Long press to turn on WPS ② WPS Short press to display SSID and password ③ Reboot Long press to reboot the device if the system freezes. 1.4 Turning on the device Step 1: Push down on the SIM Card cover and install your SIM card as indicated on the device.
Step 2: Press the Power On/Off button 1.
Screen description: Icon Display Category From 1 bar to excellent signal strength Signal Strength Network type : EDGE/GPRS H+: HSPA+,4G:LTE : SMS is available SMS status : Unread SMS : SMS full Connection Status connected 10 : UMTS/HSDPA/HSUPA,
Icon Display Category : Wi-Fi is active : Number of Wi-Fi users Wi-Fi status : WPS is active : WPS connected successfully : WPS connection failed : From 1 level to level 4 Battery : Low power Note: the information is displayed for 20 seconds, then the display powers off. You can reactivate the display with a short press on the Power key.
1.6 Connecting in Wi-Fi mode SSID: locate the SSID information on the sticker on the SIM card cover. Step 1: Use the Wi-Fi manager on the Wi-Fi embedded device to select network name (SSID). ◆ From a Windows PC: Right-click Wireless network connection on the task bar, and select: View Available Networks. Choose SSID from the list of available networks. ◆ From a Mac computer: Select System Preferences -> Network->Airport. Click “Advanced” to choose SSID from the list of available networks.
2. Quick Setup Open your browser, and input the address http://192.168.1.1 to access the login page. Default login password: admin Login and click "Quick Setup" to configure the basic settings. Admin Password: ● Login Password: Set the password for login. Wi-Fi Settings: ● SSID: Set the network name of this device. ● Security: Configure the security mode for Wi-Fi connection.
3. Charging the device You have many ways to charge your device - the magnetic attraction of the device ensures that the ALCATEL ONETOUCH LINK Y850 maintains close contact with your Wall Charger/Cradle*/Adapter*. Wall Charger charging: USB charging port Magnetic Charging Pin Option1: Plug Wall Charger into power socket and put the ALCATEL ONETOUCH LINK Y850 on wall charger. Lightly rotate the device to ensure it is securely located in the slot. Charging will then begin.
When the device is powered off, charging will take a maximum of 3 hours. USB Cable charging You can also charge the device by connecting it to a PC with the USB cable. When the device is powered off, charging will take a maximum of 4 hours. Cradle charging* Connect the USB cable with the Cradle and put the ALCATEL ONETOUCH LINK Y850 on the Cradle. Lightly rotate the device to ensure it is securely located in the slot. Charging will then begin.
Note1: *depending on your region and market. Note2: In order to protect the battery, when low power device.
4. Certification WEEE Approval This device is in compliance with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive). This symbol on device means that these products must be taken to collection points at the end of their life: - Municipal waste disposal centres with specific bins for these items of equipment - Collection bins at points of sale.
All products with this sign must be brought to these collection points. In non European Union jurisdictions: Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES. This device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
During use, the actual SAR values for this device are usually well below the values stated above. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call. The lower the power output of the device, the lower its SAR value. Body-worn SAR testing has been carried out at a separation distance of 5mm.
For more information you can go to www.alcatelonetouch.com; Additional information about electromagnetic fields and public health are available on the following site: http://www.who.int/peh-emf This device is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
