User guides
16 17
ThroughTelephonebase:
1. Repeat steps 1 and 2 in part 7.2
2. Press OK to show name, number and melody of the entry.
3. Press X , Delete? will be shown. Press OKtoconrmdelete,orpressXconrmnottodelete.
7.7. Delete the Entire Phonebook
ThroughCordlessHandset:
1. Repeat step 1 and 2 in part 7.2
2. Press twice and or to select Delete All.
3. Press , Conrm? will be show, and then Press or to select √ for delete or X for not to delete.
4. Press toconrm.
ThroughTelephonebase:
1. Repeat step 1 and 2 in part 7.2
2. Press OK twice and or to select Delete All.
3. Press OK , Conrm? will be shown. Press OKtoconrmdelete,orpressXconrmnottodelete.
8. REDIAL LIST
There are up to 10 of the last numbers called stored in redial list. If any of redial list number match with a phone-
book entry having name information, the name will be displayed instead.
8.1. Store a Redial Number into the Phonebook
In idle mode,
ThroughCordlessHandset:
1. Press and hold key to access the redial list.
2. Press or to browse the redial list.
3. Press to select desired redial number.
4. Press and or to select Add To PB.
5. Press to enter the name.
6. Press to edit the number if necessary.
7. Repeat step 5 to 6 in part 7.1
ThroughTelephonebase:
1. Press key to access the redial list.
2. Press or to browse the redial list.
3. Press OK to select desired redial number.
4. Press OK and or to select Add To PB.
5. Press OK to enter the name.
6. Press OK to edit the number if necessary.
7. Repeat step 5 and 6 in part 7.1
(Note:!appearstoindicatethisphonebookisVIPentry.)
8.2. Store a Redial Number into the Direct Memory
ThroughCordlessHandset:
1. Repeat steps 1 to 3 in part 8.1.
2. Press and or to select Add To DM.
3. Press and or to select M1/ M2/ M3.
4. Press to enter the name.
5. Press to edit the number if necessary.
6. Repeat step 5 to 6 in part 7.1.
ThroughTelephonebase:
1. Repeat steps 1 to 3 in part 8.1.
2. Press OK and or to select Add To DM.
3. Press or to select M1/ M2/ M3.
4. Press OK to enter the name.
5. Press OK to edit the number if necessary.
6. Repeat step 5 and 6 in part 7.1.
(Note:!appearstoindicatethisphonebookisVIPentry.)
8.3. Delete a Redial Number
ThroughCordlessHandset:
1. Repeat steps 1 to 3 in part 8.1.
2. Press and or to select Delete.
3. Repeat steps 3 and 4 in part 7.6.
ThroughTelephonebase:
1. Repeat Steps 1 to 3 in part 8.1.
2. Repeat steps 3 in part 7.6.
8.4. Delete the Entire Redial List
ThroughCordlessHandset:
1. Repeat steps 1 to 3 in part 8.1.
2. Press and or to select Delete All.
3. Repeat steps 3 and 4 in part 7.7.
ThroughTelephonebase:
1. Repeat Steps 1 to 3 in part 8.1.
2. Press OK and or to select Delete All.
3. Repeat steps 3 in part 7.7.
9. CALLER DISPLAY (network dependent)
ThisfeatureisavailableifyouhavesubscribedtheCallerLineIdenticationservicewithyourtelephoneservice
provider. Your phone can store up to 50 received calls with date/time information in the Call List.
Notes:Ifthecallerinformationisdisabledtosendbycallernumber,“Withheld” will be displayed. If the caller
numbers not provided, “Out of Area” will display.
In standby, if three unanswered calls are received, “3 New Calls” will be displayed.
9.1. View the Call List
All received calls are saved in Call List with the latest call putting on top of the list. When the call list is full, the
oldest call will be replaced by the new call.
In idle mode,
ThroughCordlessHandset:
1. Press and hold key, or Press and or to select Call List.
2. Press , the call list will be shown. The unanswered call which has not been read is marked with a at
the end of the number.
3. Press or to select the desired entry.
4. Press , to see more detail information of the desired entry.
ThroughTelephonebase:
1. Press key, or Press and or to select Call List.
2. Press OK , the call list will be shown. The unanswered call which has not been read is marked with a
at the end of the number.
3. Press or to select the desired entry.
4. Press OK , to see more detail information of the desired entry.
9.2. Store a Call List Number into the Phonebook
ThroughCordlessHandset:
1. Repeat steps 1 and 3 in Part 9.1.
2. Press twice and or to select Add To PB.
3. Press to enter the name.
4. Press to edit the number if necessary.
5. Repeat step 5 to 6 in part 6.1.
ThroughTelephonebase:
1. Repeat steps 1 and 3 in Part 9.1.
2. Press OK twice and or to select Add To PB.
3. Press OK to enter the name.
4. Press OK to edit the number if necessary.
5. Repeat step 5 and 6 in part 6.1
(Note:!appearstoindicatethisphonebookisVIPentry.)