User guides
12 13
You can stop the paging by press , or any dialing keys on any cordless handset or on the base.
Note:Ifthereisanincomingcallduringpaging,thephonewillringwiththeincomingcallinsteadofpaging.
5. CALL BLOCK
Thistelephoneisbuilt-inwithSmartCallBlockfeature*.Thisfeaturewillhelpyouavoidnuisancecallsbyonly
allowing some numbers to make your phone ring.
*This feature is default turn OFF and requires a subscription of Caller Line Identication service from your tele-
phone service provider as well.
CALL BLOCK OVERVIEW
Setting Explanations
O Call Block function is disabled. This is the default mode.
On Call Block function is set to Manual mode. Numbers stored in the block list will not go
through and the phone will ring silently.
Numbers can be added to the list while the phone is ringing and/or after a call (to enable,
see part 5.1).
Contacts In this mode, any number not stored to your phonebook will be automatically be blocked
and not cause your phone to ring. All calls match with contacts registered in your phone-
book will proceed normally.
When this mode is chosen, CONTACTS OK is displayed on LCD in idle mode unless you
have unread messages/missed calls (to enable, see part 5.2.1).
VIP In this VIP mode, only calls match with contacts registered as VIP in your phonebook will go
through and cause your phone to ring. Any other number will not ring. When this mode is
chosen, VIPS OK is displayed on the LCD in idle mode unless you have unread messages/
missed calls (to enable, see part 5.2.2)
ANONYMOUS This extra feature allows you to block call that do not have a number attached (ie private
calls, international calls, etc). This option can be enabled on top of any of the previous four
(to enable, see part 5.3)
5.1. Manual call block mode
Manual call block is the easiest option when starting out. When you chose ON in the call block settings, all calling
numbers stored in your block list will be blocked. You can add/remove numbers from that list at any time.
How to block an incoming call:
When Call Block function is set to ON, press whilethephoneisringing.Itwillterminatethecallandoeryou
the option to store the number to the block list in one click.
Conrm?willappearondisplay,press on cordless handset , or OKontelephonebasetoconrmstorethis
number to the block list.
IMPORTANT:ifyoudon’tconrm,thenumberwillnotbeaddedtotheblocklistandthenextcallwillgothrough
normally.
NOTE:Alltheproceduresdescribedbelow(from5.1.1to6.1)canalsobeperformedfromthehandset.From
there,theonlydierenceisthattheicon described below corresponds to the handset key
5.1.1. Enable MANUAL mode
In idle mode,
ThroughTelephonebase:
1. Press , press or to select Call Block
2. Press OK , press or to select Block Set. OR, press to access Block Set directly.
3. Press OK , press or to select On (manual mode).
After you enable this option, the call block icon will be displayed on the LCD.
5.2. Add numbers to Blocklist
5.2.1. In idle mode
ThroughTelephonebase:
1. Press , Block Set is displayed, or Press to press or to select Call Block.
2. Press OK , press or to select Blocklist.
3. Press OK , press or to select Add New, enter number to be blocked, press OK to save.
5.2.2. From incoming call numbers
Depuislabase:
En mode veille, appuyez la touche
ThroughTelephonebase:
1. In idle mode, press key, or press , press or to access the Call list.
2. Press or to browse the Call list.
3. Press OK to select desired number.
4. Press OK and or to select Add To Block.
5. Press OK to edit the number if necessary, press <OK> to save to Block List.
5.2.3. From Redial numbers
ThroughTelephonebase:
1. In idle mode, press key to access the redial list.
2. Press or to browse the redial list.
3. Press OK to select desired redial number.
4. Press OK and or to select Add To Block.
5. Press OK to edit the number if necessary.
6. Press OKtoconrm.
5.3. Edit numbers in Block List
ThroughTelephonebase:
1. Repeat step 1 and 2 in Part 5.2.1.
2. Press OK , press or to select number to be edited.
3. Press OK twice, press or to select Edit.
4. Press OK , to edit, and then press OK to save.
5.4. Delete a numbers in Blocklist
ThroughTelephonebase:
1. Repeat step 1 and 2 in Part 5.2.1.
2. Press OK , press or to select number to be deleted.
3. Press OK , then press X Delete? will be show..
4. Press OKtoconrmdelete,orpressXconrmnottodelete.
5.5. Delete all numbers from Blocklist
ThroughTelephonebase:
1. Repeat step 1 and 2 in Part 5.2.1.
2. Press OK , press or to select any Block number.
3. Press OK twice, press or to select Delete All.
4. Press OK , Conrm? will be show. Press OKtoconrmdelete,orpressXconrmnottodelete.
5.6. Automatic call block mode
5.6.1. VIPS only
In this restrictive automatic mode, only calls match with numbers stored as VIP in your phonebook will go
through and make your phone ring.
In idle mode,
ThroughTelephonebase:
1. Repeat step 1 and 2 in Part 5.1.1., or press to access BLOCK SET directly.
2. Press OK , and / to select VIP OK.
3. Press OKtoconrm.
5.6.2. Contacts only
In this mode, only calls match with contacts stored in your phonebook (normal and VIP) will go through and
make your phone ring.
In idle mode,
ThroughTelephonebase:
1. Repeat step 1 and 2 in Part 5.2, or press to access BLOCK SET directly.
2. Press OK , press or to select Contacts OK.
3. Press OKtoconrm.
5.7. Anonymous call block mode
This feature allows you to block numbers that do not display a number on your phone. It can be enabled or
disabled independently from the other call block modes.
5.7.1. Block Private Calls
This mode will block incoming calls that have been purposely kept their numbers private from you.
In idle mode,
ThroughTelephonebase:
1. Press , and or to select Call Block, then press OK , or press instead.
2. Press or to select Block Anonym.