User guides
8 9
Steady ON indicates either Call Block or Block Anonymous is set to ON
Flashes when Call Block menu is being accessed.
Flashes when phonebook is being accessed.
Flash when new TAM messages or Memo have not been read or TAM menu is being
accessed.
Steady ON indicate TAM turn ON while all the TAM messages and Memo have been
read.
Disappear indicate TAM turn OFF while all the TAM messages and Memo have been
read.
Soft key indication for abort from current operation and return to idle mode.
Steadily on when an alarm is set.
Flashes when the alarm time set before reaches.
3.3. Handset Overview
12
11
3
2
5
7
6
1
8
9
10
4
1. Menu/Ok
Inidlemode:Presstoaccessthemainmenu
Insub-menumode:Presstoconrmtheselection
Duringacall:PresstoaccessIntercom/Phonebook/RedialList/CallList
2. SMART CALL BLOCK
Instandbymode:PresstogotoCallBlockSettingmenu
Inringingmode:Presstoblockincomingcall*ifBlock Set. is set to ON.
3. UP
Inidlemode:Presstoaccessthephonebook
Inmenumode:Presstoscrollupthemenuitems
InPhonebooklist/Rediallist/CallList:Presstoscrollupthelist
Duringacall:Presstoincreasethevolume
Ineditingmode:Presstomovethecursoronecharactertotheleft.
4. DOWN
Inmenumode:Presstoscrolldownthemenuitems
InPhonebooklist/Rediallist/CallList:Presstoscrolldownthelist
Duringacall:Presstodecreasethevolume
Ineditingmode:Presstomovethecursoronecharactertotheright.
5. TALK OFF
Duringacall:Presstoendacallandgobacktoidlescreen
Inmenu/editingmode:Presstogobacktopreviousscreen,orpressandholdbacktoidlemode.
Inediting/pre-dialingmode:Presstoclearacharacter/digit.
Duringringing:Presstosetringvolumeo.
6. DIRECT MEMORY KEYS M1, M2, M3
Inidlemode/Duringacall:Presstodialpre-recordednumberstoredinDirectMem.
7. AUDIO BOOST
Duringacall:Presstoaudiobooston/o(inactiveinspeakerphonemode)
8. Key
Press to insert
Inidlemode:pressandholdtoaccesstherediallist
9. Key
Press to insert
Inidlemode:Pressandholdtoaccessthecalllist
Inpre-dialingmode/duringacall:Pressandholdtoinsertpause
10. ALPHANUMERIC KEYPAD
Press to insert a digit / character
1,2,3,key:Inidlemode,Pressandholdtodialpre-recordednumberstoredinDirect Memory.
0key:Inpre-dialingmode/duringacall,Pressandholdtoinsertash
0key:Duringacall,Pressandholdtostartconferencecall(inintercommode)
11. TALK ON/SPEAKER
Inidle/pre-dialingmode:Presstomakeacall
InRediallist/CallList/Phonebookentry:Presstomakeacalltotheselectedentryinthelist
Duringringing:Presstoansweracall
Duringacall:Presstoswitchtospeakermode
12. HANDSET LED
Duringcharging:Onsteadily
Inringingmode/Pagingmode:Flashingquickly
Whennewvoicemailornewvoicemessage(TAM):Flashslowly
3.4. Display Icons and Symbols of cordless handset
The LCD display gives you information on the current status of the telephone.
Steady ON indicates either Call Block or Block Anonymous is set to ON
Flashes when Call Block menu is being accessed.
Indicates the quality of the signal between the handset and the base.
3bars:maximumqualityand0bar:handsetoutofrangeorsearchingforthebase
Steady ON indicates a call is in progress.
Flashes when there is an incoming call
Steady ON indicates that handsfree is being used.
Steady ON when an alarm is set.
Flashes when the alarm time set reached, or Alarm menu is being accessed.
Steady ON when the telephone answering machine (TAM) is turned on.
Flashes when new TAM messages are received or TAM menu is being accessed.
SteadyONindicatestheringerisswitchedo.
Steady ON when there are newly received Voice Message Waiting (VMWI) not yet read.
Steady ON indicates the battery is fully charged.
Flashes during the initial charging of the batteries.
Internalblockiconasheswhenthebatteryisalmostfullycharge.
Flashes when low battery power level is detected.