User guides
26 27
14. TECHNICAL SPECIFICATIONS
Free Field Range Upto300metres*
Indoor Range Upto50metres*
Handset Battery Life
(average values)
10hourstalktime**
100hoursstandby**
Number of Handsets Up to 4
Intercom Mode Yes
Three-Way Conference
(1 outside correspondent +
2 internal correspondents)
Yes
Electrical Connection/Base
Mains Adaptor/Charger
Mainbaseadapterandcharger:
ModelNo.:AT-337E-060045Aor1-CHEUA451-081
Input:100-240V/50-60Hz/0.15AOutput:
6 V DC / 450 mA, 2.7 W
Use only the adapters provided with the phone.
Single-phaseAC,excludingITinstallationsdenedbythe
standard EN62368-1.
Attention:Thenetworkvoltageisclassiedasdangerousaccord-
ing to the criteria of this standard.
Telephone Connection Appliance designed for connection to a TNV3 class (telecommu-
nicationsnetworkvoltage)analoguetelephonelineasdenedby
the EN62368 standard.
Batteries AAA battery pack – 2.4 V – 300 mA
Only use the batteries supplied with the telephone.
Use any other type of battery presents a risk of explosion. Used
batteries must be disposed of in compliance with current environ-
mental protection regulations.
Operating Temperature From 5°C to 40°C
*Valuesmayvaryaccordingtoenvironment.
**Dependingoninitialbatterycharge.
15. TROUBLESHOOTING
Ifyouhavedicultywithyourphone,pleasetrythesuggestionslistedbelow.
Problem Cause Solutions
No dialing tone when pressing
key
a. The connection cord of the base
station may not be plugged in.
b. The adapter cord may not be
plugged in correctly in the base
station.
c. The line may be busy, as anoth-
er handset may not be used.
a. Check the connections. Unplug
and plug back in the mains.
Check that the telephone line cord
has been plugged into the base
station and the phone socket.
b. Check the base station plug
and the 220V plug (remove and
plug-in).
c. Wait until the line is unoccu-
pied.
When connected to a PBX, no
and/or wrong connection after
dialing.
Dialingprexisneeded. Insertthedialingprex.
"OUT OF RANGE" is displayed. a. Base station may be out of
range.
b. Base station may not be con-
nected to mains.
a. Reduce the range.
b. Connect base station to mains.
The call does not work. Service may not be activated or
wrong operation or wrong setting
Check your Subscription with
network
No display. Empty battery Recharge battery
Incoming calls are blocked (if you
did not intend to enable Call Block
function)
a. Check if BLOCK SET. is set to
VIPOKorCONTACTSOK?
b. Check if BLOCK SET. is set
to ON and the incoming call in
blacklist?
a.If so, set BLOCK SET. to OFF.
b.If so, clean up the number in
Blocklist in part 5.1.4.
Answering Machine
The unit does not record new
messages.
The answering machine may be
turnedo.
Turn on the answering machine.
The caller cannot leave a mes-
sage.
a. The answering machine may be
turnedo.
b. Message memory may be full.
a. Turn on the answering machine.
b. Erase unnecessary messages.
I cannot operate the answering
machine remotely.
a. You may be entering the wrong
remote access code.
b. You may be pressing the dial
keys too quickly.
c. The answering machine may be
turnedo.
d. You may be Through a pulse
telephone.
a. If you forget the remote access
code, reset to the default settings.
b.Presseachkeyrmly.
c. Turn on the answering machine.
d. Try again Through a touch tone
phone.
While recording an outgoing mes-
sage or listening to messages, the
unit rings and recording stops.
Probably a call is being received. Answer the incoming call and try
again to record your outgoing
message later.
Please contact the technical support of the telephone service provider for further information.
16. WARRANTY
Please carefully read the user guide included in this kit. The Alcatel XL785 Combo product is approved equip-
ment in accordance with European regulations, attested by the CE mark. The product you have just purchased
is a technological product, it must be handled with care.
Note:youhavealegalwarrantyonthisproductinaccordancewiththeapplicableregulationsonthesaleof
consumer goods in the country where you made this purchase.
For any information relating to this legal warranty, please contact your dealer.
Withoutprejudicetothelegalwarrantyfromwhichtheproductsbenet,ATLINKSguaranteesthattheproduct
appearinginthisboxcomplieswithitstechnicalspecicationsappearingintheuserguideincludedinthisbox,
and this for a warranty period, counted from the date of purchase of the new Product, the date appearing on
yourinvoiceorreceiptshowingthenameofyourresellerasproof,andequalto:Twentyfour(24)monthsfor
the telephone device, at the exclusion of consumables, accessories and batteries.
For any claim under this warranty during the warranty period, you must return the entire Product to your re-
seller, along with proof of purchase, consisting of the invoice or sales receipt issued by your reseller, indicating
the place of purchase and the number of the invoice or sales receipt issued by your reseller, indicating the place
of purchase and the serial number of the Product, following the appearance or discovery of the defect.
ATLINKS undertakes to repair any defective item due to a design, material or manufacturing defect, at its ex-
pense, or to replace it, at its expense, with an identical or at least equivalent item in terms of functionality and
performance.
If repair or replacement is impossible under normal commercial conditions, the Product will be refunded to you
or replaced by an equivalent Product.
To the maximum extent permitted by applicable law, the replacement product or component, which may be new
or reconditioned, is warranted for a period of ninety (90) days from the date of repair or until the end date of
theinitialwarrantyperiodifthelatterisgreaterthanninety(90)days,itbeingspeciedthatanyperiodofim-
mobilization of the Product of at least seven (7) days will be added to the duration of warranty remaining to run.
Thisguaranteedoesnotapplyinthefollowingcases:
‒Installationorusenotinaccordancewiththeinstructionsintheuserguide,
‒PoorconnectionorabnormaluseoftheProduct,inparticularwithincompatibleaccessories,asindicatedin
the user guide,
‒Productopened,modiedorreplacedusingunapprovedparts,serialnumbererased,illegible,damaged,
Normal wear and tear, including normal wear and tear of accessories, batteries and screens,
‒Nocompliancewiththetechnicalandsafetystandardsinforceinthegeographicalareaofuse,
‒Producthavingsueredashockorafall,
‒Productdamagedbylightning,anelectricalsurge,asourceofheatorradiation,waterdamage,exposureto
excessive ambient conditions or any other cause external to the product,