User guides

24 25
13.5. Set the Date and Time
13.5.1. Change the Date Format
ThroughCordlessHandset:
1. Press and or to select HS Settings.
2. Press and or to select Date & Time.
3. Press and or to select Date Format.
4. Press and or to select your desired date format (DD-MM-YY or MM-DD-YY).
5. Press toconrm.
ThroughTelephonebase:
1. Press and ou to select BS Settings.
2. Press OK and ou to select Date & Time.
3. Press OK and ou to select Date Format.
4. Press OK and ou to select your desired date format (DD-MM-YY or MM-DD-YY).
5. Press OKtoconrm.
13.5.2. Change the Time Format
ThroughCordlessHandset:
1. Repeat step 1 and 2 of 13.5.1
2. Press and or to select Time Format.
3. Press and or to select your desired time format (12 HR or 24 HR).
4. Press toconrm.
ThroughTelephonebase:
1. Repeat step 1 and 2 of 13.5.1
2. Press OK and ou to select Time Format.
3. Press OK and ou to select your desired time format (12 HR or 24 HR).
4. Press OKtoconrm.
13.5.3. Set the Date and Time
ThroughCordlessHandset:
1. Repeat step 1 and 2 in part 13.5.1
2. Press and or to select Set Time.
3. Press to enter the date information.
4. Press to enter the time information.
5. Press toconrm.
ThroughTelephonebase:
1. Repeat step 1 and 2 of 13.5.1
2. Press OK and ou to select Set Time.
3. Press OK to enter the date information.
4. Press OK to enter the time information.
5. Press OKtoconrm.
13.6. Rename the Cordless Handset
1. Press and or to select HS Settings.
2. Press and or to select Rename HS.
3. Press and enter the name of your handset.
4. Press toconrm.
13.7. Change Display Language
ForCordlessHandset:
1. Press and or to select HS Settings.
2. Press and or to select Language.
3. Press and or to select desired language.
4. Press toconrm.
ForTelephonebase:
1. Press and ou to select BS Settings.
2. Press OK and ou to select Language.
3. Press OK and ou to select desired language.
4. Press OK>toconrm.
13.8. Registration Cordless Handset to Telephone Base
Your handset and base station is pre-registered. Up to 4 handsets can be registered to a single base station.
For new handset, registration is required before use.
ThroughCordlessHandset:
1. Press and or to select HS Settings.
2. Press and or to select Registration.
3. Press and enter the 4-digit system PIN (This PIN is equal to 0000 by default).
4. Press toconrm.PleasewaitwilldisplayonCordlessHandsetLCD.
5. Press and hold <Page>ontheTelephonebaseforaboutveseconds,thebasestationisenteredinto
registration mode. Registering will display on Telephone base LCD.
6. When registration is successfully completed, the handset displays Handset x (X represents the number
assigned to the handset). The handset then synchronizes data, such as contacts, speed dial numbers and
handset names, with all other already registered handsets.
13.9. De-register a Handset
You are requested to enter the 4-digit PIN in order to de-register a handset from the base station (default PIN
is 0000).
ThroughTelephonebase:
1. Press and ou to select BS Settings.
2. Press OK and ou to select Delete HS.
3. Press OK and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press OK and a list of registered handsets is displayed.
6. Press ou to select one of the handsets that you want to de-register.
7. Press OKtoconrm.
13.10. Change the System PIN Code (Default system PIN code is 0000)
ThroughTelephonebase:
1. Press and ou to select BS Settings.
2. Press OK and ou to select Change Pin.
3. Press OK and enter the 4-digit current system PIN.
4. Press OK New Pin? will be shown, and enter the new system PIN.
5. Press OK Conrm? will be shown, and enter the new system PIN again.
6. Press OK to save the new system PIN.
13.11. Reset Your Phone
You can reset your phone to the default settings by Through handset or telephone base. After reset, all your
personal settings, redial and call list entries will be deleted, but your phonebook, direct memory entries and Call
block list remains unchanged.
ThroughCordlessHandset:
1. Press and or to select HS Settings.
2. Press and or to select Default.
3. Press and enter the 4-digit system PIN.
4. Press toconrm.
5. Conrm?willbeshow.Select√toconrmdelete,orselectXconrmnottodelete.
Note:Afterresetyourphone,Welcomemodescreenwillappearagain,thenyoucanselectthedesiredcountry.