User guides

22 23
Keys Functions
While message is playing While message is not playing
2 Delete the current message playback
4 Repeat playing the current message from the begin-
ning. Press twice to skip backward to the previous
message.
5 Stop the current message playback Play the message
6 Skip forward to play the next message
7 Turn on the answering machine
9 Turnotheansweringmachine
Note:Ifyouransweringmachineisswitchedo,thephonewillanswerafter12rings.Youcanpress and then
enter the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature.
11.6. Call Screening
ThroughCordlessHandset:
When the answering machine is set to On and when there is an incoming message after the preset numbers of
rings of answer delay. Screening? will show. Press or to select √ or X
√ to screen the call on your handset.
X let the cordless handset stay at silent ring mode.
At any time if you want to pick up the call, you can press on the cordless handset.
ThroughTelephonebase:
When the Bs Screening is set to On and when there is an incoming message, the Telephone base will start call
screening after the preset numbers of rings of answer delay.
At any time if you want to pick up the call, you can press or lift up corded handset on telephone base.
Note:Themessage recording will bestoppedautomatically.Iftheansweringmachineis in theprocessof
recording, the message already stored will be saved.
12. ALARM SETTINGS
You can set an alarm clock for telephone base and individual cordless handset. When an alarm is set, the
displays on the LCD. When the alarm time is reached, the and “Alarm On”ashontheLCD.Telephone
base or individual cordless handset will ring with the alarm melody for a duration of 30 seconds. You can press
any key to disable the alarm. If snooze function is activated, the alarm will sound again at the end of the snooze
period of 6 minutes.
Note:Thealarmvolumelevelisthesameasthesettingsofthehandsetringervolume.Ifthehandsetringer
issettoO,thealarmstillsoundsatVolume1level.
ThroughCordlessHandset:
1. Press and or to select Alarm.
2. Press and or to select On/O.
3. Press . If On is selected, you will be asked to enter the alarm time.
4. Enter the alarm time.
5. Press and or to select Once or Daily.
6. Press to set the snooze function, and <UP> or <DOWN> to select On or O.
7. Press toconrm.
ThroughTelephonebase:
1. Press and ou to select Alarm.
2. Press OK and ou to select On/O.
3. Press OK . If On is selected, you will be asked to enter the alarm time.
4. Enter the alarm time.
5. Press OK and ou to select Once or Daily.
6. Press OK to set the snooze function, and <UP> or <DOWN> to select On or O.
7. Press OKtoconrm.
13. PHONE SETTINGS
13.1. Set Ringer Volume
ForCordlessHandset:
1. Press and or to select HS Settings.
2. Press and or to select Ring Setup.
3. Press and or to select Ring Volume.
4. Press and or toselectthedesiredringervolume.Thereare6ringervolumelevelsincludingO.
5. Press toconrm.
ForTelephonebase:
1. Press and ou to select BS Settings.
2. Press OK and ou to select Ring Volume.
3. Press OK and ou toselectthedesiredringervolume.Thereare6ringervolumelevelsincludingO.
4. Press OKtoconrm
Note:Therespectiveringervolumewillbeplayedduringyourselection.IfOisselected, icon will display.
13.2. Set Ringer Melody
ForCordlessHandset:
1. Repeat steps 1 and 2 of 13.1
2. Press and or to select Int. Ring (for intercom call) or Ext. Ring (for incoming call).
3. Press and or to select the desired ringer melody. There are total of 10 melodies for selection.
4. Press toconrm.
ForTelephonebase:
1. Press and ou to select BS Settings.
2. Press OK and ou to select BS Ringer.
3. Press OK and ou to select the desired ringer melody. There are total of 5 melodies for selection.
4. Press OKtoconrm.
13.3. Set Alert Tone
ForCordlessHandset:
1. Press and or to select HS Settings.
2. Press and or to select Tone Setup.
3. Press and or to select Key Tone/ Battery Tone / Out Of Range.
4. Press and or to turn On or O these tones.
5. Press toconrm.
ForTelephonebase:
1. Press and ou to select BS Settings.
2. Press OK and ou to select Key Tone.
3. Press OK and ou to turn On or O.
4. Press OKtoconrm.
13.4. LCD Contrast
ForCordlessHandset:
1. Press and or to select HS Settings.
2. Press and or to select LCD Contrast.
3. Press and or to select desired Contrast level. There are 5 level for selection.
4. Press toconrmtheLCDcontrastlevel.
ForTelephonebase:
1. Press and ou to select BS Settings.
2. Press OK and ou to select LCD Contrast.
3. Press OK and ou to select desired Contrast level. There are 5 level for selection.
4. Press OKtoconrmtheLCDcontrastlevel.