User Manual Table of Contents Safety and Use ...................................................................................................................... 2 Installation Guide ................................................................................................................. 4 Main Interface Overview ................................................................................................... 4 Entrance to Main Interface .........................................................
Safety and Use We recommend that you read this chapter carefully before using your modem. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of the modem or of use contrary to the instructions contained herein. Traffic Safety When driving, do not use the modem: When switched on, the modem emits electromagnetic waves that can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes or airbags.
10. Do not paint the modem. Collection Point: This symbol on the modem means that it must be taken to collection points at the end of their life: Municipal waste disposal centers with specific bins for these items of equipment Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries: These collection points are accessible free of charge.
Installation Guide Installation procedures may vary based on the operating system installed on your PC. The following instructions are based on the Windows XP OS: Turn on your PC and plug the modem into the USB interface slot to begin software installation. Windows should automatically detect the new device and will prompt you to begin installation. After following the prompts of installation setup, upon completion, a shortcut will be placed on your desktop for quick future access. Note: 1.
Connection Statistics Icon Description Network Signal Indicates the signal strength of the network Network Status Indicates the network status. This will display the operator name which the modem can find the network. Or show the modem haven’t ready.
A PUK dialog box will then be displayed asking you to enter the right PUK code, PIN Code and Confirmed PIN. Click on if you fail to input the correct PUK code after 10 attempts, you will need to contact your service provider. If the PUK and PIN code is correct, the application will be launched and all features are enabled Connect to Internet 1.
and final choice which Auth Type you are using by manually; Click Please select you preferred network and click on to default your connection setting. • • Note：Users may obtain Number, APN Code, User Name, Password and Auth type information from networks provider. SMS Services (Text Message) Click SMS icon from the main interface of the PC suite to access the SMS service. 1. Displaying the received SMS When a new message is received, a message box appears in the status bar.
(2) Click on to send the message. If the message is not sent, it will be saved in the Outbox. 4. Reply y Select a message in the inbox and then click on in the shortcut menu bar; y The recipient’s / number will appear. It can now be modified; y Enter the reply in input field, and then click on . 5. Forward y Select a message and then click on in the shortcut menu bar; y The content of the selected message will appear in the input field.
saved as a text file. Contacts Click contacts from the main interface of PC suite to access the contacts management. The contacts list column contains: (U) SIM /Modem /Computer. You can use contacts stored either on the (U) SIM, modem or on computer in the corresponding window. 1. New y Select from the tool bar to access the contacts editor; y Enter the relevant information, and press ; the new contact will appear in the current contact list. 2.
y y memory. Right-Click your mouse pointer, if selected in the manual and select a target memory different from the memory being used; Contact(s) will be copied to the target memory. Settings Click on settings icon from the main interface of PC Suite. A menu with various settings will appear. 1. Network select y Select in the Settings menu.
y y Validity period: You can choose between: 6 hours/1 day/1 week. Message Alert: Click to validate the message alert sound. 5. Connection profile settings Select in the Settings menu to access the connection profile setting window.
connected/ disconnected. 7. Request PIN y Click on the menu and select . Activate the PIN input dialog box; y Select and enter the correct PIN code; y Click on . 8. Change PIN y Click on , and activate the PIN modify dialog box; y Input the old PIN and the new PIN, then confirm; y Click on to confirm the new PIN code. Note: You can only access the modify menu if the PIN is enabled. 9.
Warranty • The modem is warranted against any deviation from technical specifications for a period of twelve (12) months from the date specified on your original invoice1. • Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on the modem, and present a proof of purchase. • The vendor or repair centre will decide whether to replace or repair, as appropriate the modem.
• • • The modem is also warranted against hidden defects (defects inherent in the design, manufacture, etc.). There are other express warranties than this printed limited warranty, express or implied, of any nature whatsoever. In no event shall the manufacturer be liable for incidental or consequential damages of any nature whatsoever, including but not limited to trading loss, commercial loss, to the full extent those damages can be disclaimed by law.
3. Hardware problem. You may: 1. Try to logon from another location; 2. Update the software; 3. Check the hardware or use another data card and retry. 6. Q: Why does the prompt “No available connection profile. Please set an available default one in connection profile” appear? A: Please add a connection profile manually. 7. Q: It failed to connect to the internet A: Please make sure the connection profile and settings are correct. 8.
double-click the file HSPA USB MODEM.pkg 2. Click Continue 3.
4. When the installation is finished, you will see the following window, you need to restart your computer to use the modem. 5. Clicking Application>HSPA USB MODEM to start the connect application. You may install this application in the Dock to access it faster.
Radio Waves: Proof of compliance with international standards (ICNIRP) or with European Directive 1999/5/EC (R&TTE) is required of all Modem models before they can be put on the market. The protection of the health and safety for the user and any other person is an essential requirement of these standards or this directive. THIS MODEM COMPLIES WITH INTERNATIONAL AND EUROPEAN REQUIREMENTS REGARDING EXPOSURE TO RADIO WAVES. The Modem is a radio transmitter/receiver.
distance of 5mm. While there may be difference between the SAR levels on various modems and at various positions, they all meet the relevant International guidelines and EU requirement for RF (radio-waves) exposure. For body-worn operation, the modem meets EU exposure guidelines provided that it is used with a non-metallic accessory with the handset at least 1.5cm from the body.
Alcatel is a trademark of Alcatel-Lucent used under license by TCT Mobile Limited. All rights reserved © 2009-2010 TCT Mobile Limited. TCT Mobile Limited reserves the right in the customer’s interest to alter material or technical specifications without prior notice.
