Quick Start Guide CJB17H0ALAAA
Safety and use We recommend that you read this chapter carefully before using this device. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of this device or of use contrary to the instructions contained herein. Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger. Follow the rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus.
Do not place your device or its accessories in containers with strong electromagnetic field. Do not place magnetic storage media near your device. Radiation from the device may erase the information stored on them. Do not put your device in a high-temperature place or use it in a place with flammable gas such as a gas station. Keep your device and its accessories away from children. Do not allow children to use your device without guidance. Use approved chargers only to avoid explosion.
1. Overview Onetouch W600 is a portable wireless WiFi dongle, can provide a simple way to share 3G with any WiFi embedded device or PC. 1.
1.
1.
1.4 Turn on device Computer provides power Insert SIM card and micro SD Card Into modem Plug into Charger or Computer Note: Installation the SW when device plug into computer first time. You can get detail installation guide information in User Manual. Other way to provides power Plug modem into USB Charger or Power Bank, the modem work.
1.
1.6 Connect in WiFi mode SSID：W600*_XXXX, where * is the variant (D, E…) and XXXX is the last four digits of MACAddress. WiFi key: xxxxxxxx (the last eight digits of IMEI if have default key). Step 1: Use the WiFi manager on the WiFi embedded device to select network name (SSID). ◆From a Windows PC: Right-click Wireless network connection on the task bar, select View Available Networks. Choose SSID from the list of available networks. ◆From a Mac computer: Select System Preferences -> Network->Airport.
2. Quick Setup Open the browser, and input the address http://192.168.1.1 to access the login page. The main screen will display Default Login password: admin Login and Click "Quick Setup" to configure the basic settings, include Admin password, WiFi Setting Admin password: Set the password for login WiFi settings: set the SSID and WiFi key. SSID: the network name of this device. WiFi key: password for WiFi connection.
3. Certification WEEE Approval This device is in compliance with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive). RoHs Approval This device is in compliance with the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2002/95/EC (RoHs Directive).
This device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR.
During use, the actual SAR values for this device are usually well below the values stated above. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call. The lower the power output of the device, the lower its SAR value. Body-worn SAR testing has been carried out at a separation distance of 5mm.
For more information you can go to www.alcatelonetouch.com Additional information about electromagnetic fields and public health are available on the following site: http://www.who.int/peh-emf This device is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
