User’s Guide
Contents of the package Versatis C650: The box contains the following elements: - the base - the handset - the line cord - the power supply - the battery compartment cover - the batteries - the User’s Guide. Versatis C650 duo/trio: - the additional handset(s) - the charger(s) - the batteries - the battery compartment cover(s). Please read this guide carefully to get to know the main features of your Versatis C650 and read the safety instructions before using it.
The handset keys Base keys and LEDs - Open Received Calls list* - Take call - Hands free - Increase/decrease earpiece or hands-free volume - Hang up - Turn handset on / off (long press) - Back to previous menu - Open Phonebook - Access to operator services* - Open Dialled Numbers list - In standby mode: open menu - Cut incoming call ringer Base key (paging) - Short press: page handset - Long press: register new handset Flashing: - Incoming call, or call in progress - New message - Registering hand
1 1. 1.1 1.2 1.3 FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the base ...................................................................................................................................................... Installing the handset ..................................................................................................................................
2 1. FIRST USE Your Versatis C650 is a DECT™* standard appliance designed to receive and transmit telephone calls. The Versatis C650 is designed for connection to the public telecommunications network. It requires an electrical power supply in order to function. 1.1 INSTALLING THE BASE 1.1.1 Precautions As with all radio communications, the signal quality will depend on the location and environment of the base and handset.
3 ! Only use rechargeable batteries with exactly the same specifications as those supplied with the product. Using non-rechargeable or non-conforming batteries can damage the product and could pose a health hazard (see Chapter 9 “Technical Specifications”). Failure to comply with this recommendation will invalidate the manufacturer's warranty. Batteries can split or leak if incorrectly inserted, opened or exposed to heat. Never dispose of batteries in a fire: they could explode. 1.3 USING THE HANDSET 1.
4 2. USING THE TELEPHONE 2.1 MAKING A CALL Direct dialling: Press , then dial the number to be called. Pre-dialling: Dial the number, then press Press . to hang up at the end of the call. 2.2 ANSWERING A CALL When the telephone rings, pick up the handset and press Press . to hang up at the end of the call. - OR If the auto-talk option is enabled, remove the handset from the base to take the call immediately. Note: You can adjust the handset volume by pressing or during a call.
5 2.7 SECRECY / MUTE (MICROPHONE OFF) To put your correspondent on hold while you talk to someone next to you. Press during the call. The handset display indicates MUTE ON. Press to cancel and get back to your correspondent. 2.8 LOCATING A HANDSET (PAGING FUNCTION) Forgotten where you left your handset(s)? Press the key on the base. 4 The handsets associated with the base will ring for 30 seconds. 4 The line LED on the base flashes.
6 3. YOUR PHONEBOOK Each handset can hold up to fifty Phonebook entries. Each entry or ‘record’ contains the name and number of a correspondent. 3.1 USING THE PHONEBOOK TO MAKE CALLS Press Use Press Use Press Press Press to go to the main menu. or to select PHONE BOOK. to open the Phonebook submenu. or to select VIEW RECORDS. to confirm; all the records appear in alphabetical order. or , or the first letter of the name you are looking for, to view the record.
7 3.5 DELETING NAMES / NUMBERS Press Use Press Use Press , use or or to select PHONE BOOK, and press to confirm. to select DELETE RECORDS. to confirm; the records appear on the display. or or enter the first letter of the name you are looking for, and press . The display reads DELETE ?. to confirm. Note: If you decide not to delete or modify a record, press , or wait a minute for the menu to close automatically. 3.
8 4. USING YOUR VERSATIS C650 WITH THE OPERATOR’S VOICEMAIL SERVICE* By subscription to your operator, you can have your calls diverted to a voicemail box when you are absent or already on the line. New messages are indicated by an icon on the display. For more details, contact your operator. 4.1 RECEIVING VOICEMAIL MESSAGES When new messages are received, the base and handset LEDs flash and the The icon disappears once you have consulted the voicemail. icon appears on the handset display.
9 5. IDENTIFYING CALLERS* 5.1 UNDERSTANDING CALLER ID DATA If you are subscribed to your operator’s Caller ID service, and if the network transmits the relevant data, the caller's name or number will be shown on the display as indicated below. The numbers, dates and times of incoming calls are recorded in the Received Calls list.
10 6. CUSTOMIZING YOUR HANDSET 6.1 RINGER TONE You can choose between five ringtones and five melodies. Press Use Press Press Use Press . or or to select SOUND SETUP and press to confirm. to select the RINGER TONE submenu. to open the menu. The display reads41/10. The default setting is 7/10. or to select an option (from 1 to 10). An extract of the selected ringtone/melody is played. to save the selection. 6.
11 6.6 NAMING A HANDSET In the Initial Setup menu: Press Press Use the keypad to enter a name. or to select the HANDSET NAME submenu. to open the menu. The display reads HANDSET NAME. Note: To make a correction, press Press . to save the name. The set beeps to confirm and the handset name appears on the display. 6.7 SELECTING THE LANGUAGE In the Initial Setup menu: Press to select the LANGUAGE submenu. Press to open the menu. Use Press or to select a language.
12 6.10 ROOM MONITOR (APPLIES ONLY TO MULTI-HANDSET INSTALLATIONS) Press Press Press to go to the main menu. or to select ROOM MONITOR. to open the ROOM MONITOR menu. The display reads ROOM MONITOR. Using the keypad, enter the number of the handset to be monitored. Note: If you activate the Room Monitor function using handset 1, you need to put handset 2 or 3 in the room you want to monitor. ! Do not place the handsets side by side.
13 7. BASE SETTINGS 7.1 CHANGING THE PIN CODE The system PIN is used for registering new handsets with your Versatis C650. Press Select INITIAL SETUP using the navigation keys and confirm. Select CHANGE PIN using the navigation keys and press to open the menu. to confirm. 4 The display reads OLD PIN CODE _ _ _ _. Enter the 4 digits of the current PIN (by default, 0000) and press to confirm. 4 The display reads NEW PIN CODE. Enter the 4 digits of the new code and press to confirm.
14 7.3.2 Call barring You can prevent certain numbers from being dialled. Press Select DIALING SETUP and press to confirm. Select CALL BARRING and press to confirm. Enter the code (by default, 0000) and press Use Select CALL BARRING 1, CALL BARRING 2, CALL BARRING 3, CALL BARRING 4 and press Enter the call prefixes (1 to 3 digits) to be barred on outgoing calls and press to open the menu. or to select ON and press to confirm. to confirm (the default value is OFF).
15 8. USING YOUR TELEPHONE WITH MULTIPLE HANDSETS 8.1 REGISTERING A HANDSET The handset(s) delivered with your Versatis C650 will already be registered on the base, ready to use. You can have up to 6 handsets associated with (“registered on”) the base of your telephone. To add another handset, follow the registration procedure below. In the Initial Setup menu: Press Press Use If YES is selected, press . The display reads HOLD BASE FIND KEY FOR 5 SECS.
16 8.5 TRANSFERRING AN OUTSIDE CALL TO ANOTHER HANDSET You can pass an external call over to another handset. Press on the handset to put the external call on hold, and dial the number of the handset you want to call (Trio version only). When the internal handset answers, press to transfer the call. 8.6 THREE-WAY CONFERENCE (2 INTERNAL PARTIES AND ONE EXTERNAL) During an external call, press Using the keypad, dial the number of the handset you want to call (Trio version only).
17 9. TECHNICAL SPECIFICATIONS Free field range Up to 300 meters* Indoor range Up to 50 meters* Handset battery life (average values) 6 hours talktime** 100 hours standby** Number of handsets Up to 6 Intercom mode Yes Three-way conference (1 outside correspondent + 2 internal correspondents) Yes Electrical connection / Base mains adapter / Charger Model IA5060G Input: 100-240 V AC / 50-60 Hz / 0.2 A Output: 6 V DC / 500 mA Model DM-SC060050 Input: 100-240 V AC / 50-60 Hz / 0.
18 10. TROUBLESHOOTING... As a general rule, if a problem occurs, remove the batteries from all the handsets in your installation for about 1 minute, then disconnect and reconnect the power supply to the base and reinstall the handset batteries. Problem Nothing display. appears Cause on the The device is not powered up. There is no dial tone. Solution Check the power supply connection. The battery is flat. Put the handset back on its base to recharge the battery. The main screen is in standby.
19 11. SAFETY In the event of an electrical hazard, the mains adapter acts as 230V power isolating device. It should therefore, as a precaution, be installed close to the appliance and be easily accessible. To disconnect the device from the primary power source, the mains adapter must be removed from the 230V AC / 50 Hz socket. If the mains adapter fails, it must be replaced by an identical model.
20 12. ENVIRONMENT This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. The European Union has implemented a specific collection and recycling system for which producers are responsible. This appliance has been designed and manufactured with high quality materials and components that can be recycled and reused.
22, Quai Gallieni - 92150 Suresnes - France S.A.S. (Simplified Joined Stock Company) with capital of 500 000 euros Registration number: 508 823 747 R.C.S. Nanterre Réf. : xxx xxx xxxxx 18/11/10 ATLINKS Europe © ATLINKS 2010 - Reproduction prohibited. The manufacturer reserves the right to modify the specifications of its products in order to make technical improvements or comply with new regulations. ALCATEL and VERSATIS are registered trademarks.
