User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 97 10-Dec-12
11.48 Panasonic KX-TGP550T04
11.48.1 Limitations Specific to Panasonic KX-TGP550T04 Phone
There are no additional limitations except for those mentioned in Limitations and Differences.
11.48.2 Features Codes on Panasonic KX-TGP550T04 Phone
This section presents the feature codes for PBX Services accessible during a call specific to the
Panasonic KX-TGP550T04 Phone and serves as a supplement to
Quadro Feature Codes on IP
Phone . s
PBX Services accessible during a call Keys/Soft Keys
Call Hold HOLD
Call Waiting SWITCH softkey
Call Blind Transfer
MENU softkey ->Blind transfer softkey ->dial the
number -> TRANS softkey or #
Call Transfer with Consultation
MENU softkey ->Transfer softkey ->dial the number
-> call establishment->TRANS softkey
Call Conference
MENU softkey ->Conference softkey ->dial the
number -> call establishment->CONF softkey
To Put a Call on Hold
During the call press the HOLD button to place the call on hold. To resume the held call, press the
HOLD button again.
To Accept a Second Incoming Call
When the line is busy, the user will see a notification about incoming call on the phones display.
Press the SWITCH softkey to answer the second incoming call. This automatically places the
active call on hold. Users may toggle between the calls by pressing the SWITCH softkey.
To Blind Transfer a Call
During an active call press the MENU softkey, scroll to Blind transfer and press the SELECT
softkey. This puts the call in progress on hold. Dial the number to where you want to transfer the
call and press the TRANS softkey or # to transfer the call. You will be disconnected automatically
from both calls.
To Transfer a Call with Consultation
During an active call press the MENU softkey, scroll to Transfer and press the SELECT softkey.
This puts the call in progress on hold. Dial the number to where you want to transfer the call.
Once the call is established, press the TRANS softkey to transfer the call. You will be disconnected
automatically from both calls.
To Set up a Conference Call
During an active call press the MENU softkey, scroll to Conference and press the SELECT
softkey, which automatically places the active call on hold. Dial the number, once the call is
established, press the CONF softkey to begin the conference call.
To end the three-way conference call, go on-hook during a conference.