User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 96 10-Dec-12
11.47 Panasonic KX-UT123
11.47.1 Limitations Specific to Panasonic KX-UT123 Phone
There are no additional limitations except for those mentioned in Limitations and Differences.
11.47.2 Features Codes on Panasonic KX-UT123 Phone
This section presents the feature codes for PBX Services accessible during a call specific to the
Panasonic KX-UT123 Phone and serves as a supplement to
Quadro Feature Codes on IP Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold HOLD
Call Waiting HOLD
Call Blind Transfer Blind softkey ->dial the number -> #
Call Transfer with Consultation
TRANSFER -> dial the number -> call establishment
-> OK softkey
Call Conference
CONFERENCE->
dial the number
->
call
establishment -> CONFERENCE
To Put a Call on Hold
During the call press the HOLD button to place the call on hold. To resume the held call, press the
HOLD button again.
To Accept a Second Incoming Call
When the line is busy, the user hears a call waiting tone notifying the user that a call is waiting
and will see a notification about incoming call on the phones display. Press the HOLD button to
answer the second incoming call. Users may toggle between the calls by pressing the HOLD
button.
To Blind Transfer a Call
During an active call press the Blind softkey, this puts the call in progress on hold. Then dial the
number to where you want to transfer the call and press # to transfer the call. You will be
disconnected automatically from both calls.
To Transfer a Call with Consultation
During a call press the TRANSFER button to make a call and automatically place the active call on
hold. Dial the number to where you want to transfer the call. Once the call is established, press
the OK softkey to transfer the call. You will be disconnected automatically from both calls.
To Set up a Conference Call
During a call press the CONFERENCE button to make a call which automatically places the active
call on hold. Dial the number, once the call is established, press the CONFERENCE button again
to begin the conference call.
To end the three-way conference call, hang up the phone.