User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 91 10-Dec-12
To end the three-way conference call, hang up the phone.
11.42 Alcatel Temporis IP 600
11.42.1 Limitations Specific to Alcatel Temporis IP 600 Phone
There are no additional limitations except for those mentioned in Limitations and Differences.
11.42.2 Features Codes on Alcatel Temporis IP 600 Phone
This section presents the feature codes for PBX Services accessible during a call specific to the
Alcatel Temporis IP 600 Phone and serves as a supplement to
Quadro Feature Codes on IP
Phone . s
PBX Services accessible during a call Keys/Soft Keys
Call Hold Hold
Call Waiting LINE/HOLD
Call Blind Transfer Tran ->dial the number -> Tran
Call Transfer with Consultation
Tran -> dial the number -> call establishment ->
Tran
Call Conference
Conf-> dial the number-> call establishment ->
Conf
To Put a Call on Hold
During the call press the Hold softkey to place the call on hold. Press the Resume softkey to
return to the call.
To Accept a Second Incoming Call
Call waiting tone (short beeps) indicates an incoming call. Press the blinking (green light) LINE
button to accept a second incoming call. First call is placed on hold. Press the blinking LINE
button twice to toggle between the calls or use the Up or Down navigation keys and press the
Resume softkey to hold the call or resume.
To Blind Transfer a Call
During an active call press the Tran softkey, this puts the call in progress on hold. Then dial the
number to where you want to transfer the call and press the Tran softkey or hang up. You will be
disconnected automatically from both calls.
To Transfer a Call with Consultation
During a call press the Tran softkey to make a call and automatically place the active call on hold.
Dial the number to where you want to transfer the call. Once the call is established, press the
Tran softkey again to transfer the call. You will be disconnected automatically from both calls.
To Set up a Conference Call
During a call press the Conf softkey to make a call which automatically places the active call on
hold. Dial the number, once the call is established, press the Conf softkey.
To end the three-way conference call, hang up the phone.