Manualshelf

User`s guide

ManualsBrandsAlcatel ManualsComputer equipmentTEMPORIS IP 200
81828384858687888990
Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 90 10-Dec-12
11.41 Alcatel Temporis IP 200
11.41.1 Limitations Specific to Alcatel Temporis IP 200 Phone
There are no additional limitations except for those mentioned in Limitations and Differences.
11.41.2 Features Codes on Alcatel Temporis IP 200 Phone
This section presents the feature codes for PBX Services accessible during a call specific to the
Alcatel Temporis IP 200 Phone and serves as a supplement to
Quadro Feature Codes on IP
Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold
Call Waiting
LINE/
Call Blind Transfer
->dial the number ->
Call Transfer with Consultation
-> dial the number -> call establishment -
>
Call Conference
CONF-> dial the number-> call establishment ->
CONF
To Put a Call on Hold
During the call press the button to place the call on hold. Press the button again
to return to the call.
To Accept a Second Incoming Call
Call waiting tone (short beeps) indicates an incoming call. Press the blinking (green light) LINE
button to accept a second incoming call. First call is placed on hold. Press the blinking LINE
button twice to toggle between the calls or use the Up or Down navigation keys and press the
button to hold the call or resume.
To Blind Transfer a Call
During an active call press the button, this puts the call in progress on hold. Then dial
the number to where you want to transfer the call and press the
button or hang up. You
will be disconnected automatically from both calls.
To Transfer a Call with Consultation
During a call press the button to make a call and automatically place the active call on
hold. Dial the number to where you want to transfer the call. Once the call is established, press
the
button again to transfer the call. You will be disconnected automatically from both
calls.
To Set up a Conference Call
During a call press the CONF button to make a call which automatically places the active call on
hold. Dial the number, once the call is established, press the CONF button.