User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 88 10-Dec-12
11.40 Yealink VP530
11.40.1 Limitations Specific to Yealink VP530
In order to make video calls you need to go Quadro’s menu and enable video codec of that
extension, on which is set your Yealink VP530 phone.
There are no additional limitations except for those mentioned in
Limitations and Differences.
11.40.2 Features Codes on Yealink VP530
This section presents the feature codes for PBX Services accessible during a call specific to the
Yealink VP530 Phone and serves as a supplement to
Quadro Feature Codes on IP Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold Hold
Call Waiting
Answer
Call Blind Transfer
Transfer

dial the number

Transfer
Call Transfer with Consultation
Transfer

dial the number

consult

hang up or
Transfer
Call Conference
Conference-> dial the number-> call establishment ->
Conference
To Put a Call on Hold
To hold/resume a call:
1. Press the Hold softkey to put your active call on hold.
The phone LCD screen shows the call is on
hold and the event indicator LED flashes green.
2. If there is only one call on hold, press the Resume softkey to retrieve the hold call.
To Accept a Second Incoming Call
Call waiting tone (short beeps) indicates an incoming call. Press
or the Answer softkey. The
incoming call is answered and the original call is placed on hold.