User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 86 10-Dec-12
11.39 Yealink VP-2009
11.39.1 Limitations Specific to Yealink VP-2009
In order to make video calls you need to go Quadro’s menu and enable video codec of that
extension, on which is set your Yealink VP-2009 phone.
There are no additional limitations except for those mentioned in
Limitations and Differences.
11.39.2 Features Codes on Yealink VP-2009
This section presents the feature codes for PBX Services accessible during a call specific to the
Yealink VP-2009 Phone and serves as a supplement to
Quadro Feature Codes on IP Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold HOLD
Call Waiting
Answer
Call Blind Transfer Transfer

dial the number

hang up or press Transfer
Call Transfer with Consultation
Transfer

dial the number

consult

hang up or
Transfer
To Put a Call on Hold
To hold/resume a call:
1. Press the Hold button or Hold softkey to put your active call on hold.
2. If there is only one call on hold, press the Resume softkey or Hold button to retrieve the
call.
To Accept a Second Incoming Call
1. In desktop status, click Call Feature->Call Waiting option to enter.
2. Click the icon
to enable/disable Call Waiting function.
3. Press “OK” to confirm the change.
4. Press “Save” to save the changes and get back to the Call Features page.
Please Note: If Call Waiting is enabled by the called extension, when a new call is coming during
an active call, the device will sound a “Du…”, and the LCD indicates the incoming call, the caller
will hear the ring back tone.
To Blind Transfer a Call
1. A and B is on an conversation, A press the Transfer hot key to put B on hold, then A can
dial the third telephone number C and press the Transfer hot key to call out. A will turn to
hold status, and the LCD will display as Transferred.
2. After C answered it, or A press the End Call hot key to complete the transfer.
3. A will be disconnected from the call. B can talk to C.