User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 82 10-Dec-12
11.37 Yealink SIP-T32G
11.37.1 Limitations Specific to Yealink SIP-T32G
There are no additional limitations except for those mentioned in Limitations and Differences.
11.37.2 Features Codes on Yealink SIP-T32G
This section presents the feature codes for PBX Services accessible during a call specific to the
Yealink SIP-T32G Phone and serves as a supplement to
Quadro Feature Codes on IP Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold Hold softkey
Call Waiting Answer
Call Blind Transfer

dial the number

Call Transfer with Consultation
 dial the number  consult 
Call Conference
Conf

dial the number

Send

call establishment

Conf
To Put a Call on Hold
To hold/resume a call:
1. Press the Hold softkey to put your active call on hold.
2. If there is only one call on hold, press the Resume softkey or Hold button to retrieve the
call.
3. If there are more than one call on hold, press the line button, press the Up/Down button
to highlight the call, press the Resume softkey or Hold button to retrieve the call.
To Accept a Second Incoming Call
1. In desktop status, click Call Feature->Call Waiting option to enter and enable Call Waiting
function.
2. Press “Save” to save the changes and get back to the Call Features page.
Please Note: If Call Waiting is enabled by the called extension, when a new call is coming during
an active call, the device will sound a “Du…”, and the LCD indicates the incoming call, the caller
will hear the ring back tone. When the phone is ringing, press Answer sofkey or the line with a
blinking LED. The phone will put the call in progress on hold.