User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 80 10-Dec-12
11.36 Yealink SIP-T26P/SIP-T28P
11.36.1 Limitations Specific to Yealink SIP-T26P/SIP-T28P
There are no additional limitations except for those mentioned in Limitations and Differences.
11.36.2 Features Codes on Yealink SIP-T26P/SIP-T28P
This section presents the feature codes for PBX Services accessible during a call specific to the
Yealink SIP-T26P/SIP-T28P Phone and serves as a supplement to
Quadro Feature Codes on IP
Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold
HOLD
Call Blind Transfer

dial the number

hang up or press
Call Transfer with Consultation

dial the number

consult

hang up or
Call Conference
 dial the number
To Put a Call on Hold
To hold/resume a call:
1. Press the Hold button
or Hold softkey to put your active call on hold.
2. If there is only one call on hold, press the Resume softkey or Hold button to retrieve
the call.
3. If there are more than one call on hold, press the line button, press the Up/Down button to
highlight the call, press the Resume softkey or Hold button
to retrieve the call.
To Blind Transfer a Call
1. Press the Tran button or Tran softkey during the active conversation, the call will
be on hold, there will be a dial tone. Dial the other telephone number.
2. Hang up to complete the transfer.
3. You will be disconnected from the call.
To Transfer a Call with Consultation
1. Press Tran button or Tran softkey during the active conversation, the call will be on
hold, there will be a dial tone. Dial the second telephone number.