User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 78 10-Dec-12
11.35 Yealink SIP-T22P
11.35.1 Limitations Specific to Yealink SIP-T22P
There are no additional limitations except for those mentioned in Limitations and Differences.
11.35.2 Features Codes on Yealink SIP-T22P
This section presents the feature codes for PBX Services accessible during a call specific to the
Yealink SIP-T22P Phone and serves as a supplement to
Quadro Feature Codes on IP Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold Hold soft key
Call Blind Transfer
Tran soft key

dial the number

hang up or press
Tran soft key
Call Transfer with Consultation
Tran soft key 
dial the number
 consult 
hang up or
Tran soft key
Call Conference
Conf soft key

dial the number
To Put a Call on Hold
To hold/resume a call:
1. Press the Hold softkey to put your active call on hold.
2. If there is only one call on hold, press the Resume softkey to retrieve the call.
3. If there are more than one call on hold, press the line button, press the Up/Down button to
highlight the call, press the Resume softkey to retrieve the call.
To Blind Transfer a Call
1. Press the Tran softkey during the active conversation, the call will be on hold, there will be
a dial tone. Dial the other telephone number.
2. Hang up to complete the transfer.
3. You will be disconnected from the call.
To Transfer a Call with Consultation
1. Press the Tran softkey during the active conversation, the call will be on hold, there will be
a dial tone. Dial the second telephone number.
2. When the phone is answered, you can have a private conversation without the first person
hearing it, then hang up to complete the transfer.
3. You will be disconnected from the call.