User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 74 10-Dec-12
11.32 Telematrix IP550 Spectrum Plus
11.32.1 Limitations Specific to Telematrix IP550 Spectrum Plus
• Voice Mail indication doesn’t work.
• There is no support to switch between calls.
• There isn’t any indication or reminder of missed calls.
• Each time Quadro reboots, you need also to reboot Telematrix IP550.
• You can’t use “Call Park” feature of Quadro.
There are no additional limitations except for those mentioned in
Limitations and Differences.
11.32.2 Features Codes on Telematrix IP550 Spectrum Plus
This section presents the feature codes for PBX Services accessible during a call specific to the
Telematrix IP550 Spectrum Plus Phone and serves as a supplement to
Quadro Feature Codes
on IP Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold Hold key (red key)
Call Blind Transfer
FWD key

dial the number
Call Conference
Conf key

dial the number

Conf key
To Put a Call on Hold
During an active call press the Hold key to hold, if you want to resume the call press the Hold key
again.
To Blind Transfer a Call
Press the FWD key. Dial the destination number and #.
To Set up a Conference Call
Press the Conf key and dial the destination number and #, then press the Conf key again.