User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 69 10-Dec-12
11.29 Linksys SPA922/921 IP Phones
11.29.1 Limitations Specific to Linksys SPA922/921
There are no additional limitations except for those mentioned in Limitations and Differences.
11.29.2 Features Codes on Linksys SPA922/921
This section presents the feature codes for PBX Services accessible during a call specific to the
Linksys SPA922 Phone and serves as a supplement to
Quadro Feature Codes on IP Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold
hold  Resume Softkey
Call Blind Transfer
right navigation button

“bxfer”

dial the
number
Call Transfer with Consultation
“xfer”

dial the number

consult

“xfer”
Call Conference
“conf”

dial the number

“conf”
To Put a Call on Hold
Press the hold button, and then press the resume Softkey button to resume
the call. If you have another call press the hold
button to send the first call on hold, then pick
up the second call by on hooking and again off hooking the handset (or press the Speaker
button if you want to talk on the speakerphone). If you want to switch to the first call, press the
hold
button, then the resume Softkey button. If you do not want to keep the
current call then just go on hook (or press the Speaker
button if you are talking on the
speakerphone). Press the resume Softkey button to talk to another one).
To Blind Transfer a Call
Press the right arrow on the navigation button once, then the bxfer button and dial the
destination number and #.
Or go off hook, press the xfer button, dial the destination number and # then press the xfer
button again.
To Transfer a Call with Consultation
Press the xfer button, dial the destination number and #, talk to the caller then press the xfer
button again.
To Set up a Conference Call
Press the conf button, dial the destination number and #, and then press the conf button again.
If you want to exit press the join button.