User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 68 10-Dec-12
11.28 Berkshire 5000 (ATL 5000) IP phone
11.28.1 Limitations Specific to Berkshire 5000
There are no additional limitations except for those mentioned in Limitations and Differences.
11.28.2 Features Codes on Berkshire 5000
This section presents the feature codes for PBX Services accessible during a call specific to the
Berkshire 5000 IP Phone and serves as a supplement to
Quadro Feature Codes on IP Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold Line1/Hold or Line2/Hold
Call Waiting Line1/Hold or Line2/Hold
Call Blind Transfer
Function  XSFER 
dial the number

OK
or
Line1/Hold

Function

XSFER

dial the number
 OK
Call Transfer with Consultation
Line2/Hold  dial the number  OK  Function 
XSFER
Call Conference
Line2/Hold  dial the number  OK  Function  3-
way
To Put a Call on Hold
During a call press the Line1/Hold or Line2/Hold keys. The LED of the corresponding line
button on hold will start blinking.
To resume the call on hold, press the Line1/Hold or Line2/Hold keys with the blinking LED.
To Accept a Second Incoming Call
During a call, press the Line1/Hold or Line2/Hold keys. This puts the call in progress on hold
and picks up an incoming call.
To Blind Transfer a Call
During a call, press the Function then XSFER buttons.
Dial the number the call is to be transferred to and press OK to confirm the transfer.
Or press the Line1/Hold and then the Function and XSFER buttons.
Dial the number the call is to be transferred to and press OK to confirm the transfer.
To Transfer a Call with Consultation
During a call, press the Line2/Hold to put the call in progress on hold and to receive a dial tone.
Dial the number the call is to be transferred to, consult and press the Function and then XSFER
buttons to transfer.
To Set up a Conference Call
During a call, press the Line2/Hold to put the call in progress on hold and to receive a dial tone.
Dial a third participant’s number and press the Function and then 3-way buttons to join the two
calls.