User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 66 10-Dec-12
11.27 Thomson ST2030S
11.27.1 Limitations Specific to Thomson ST2030S
There are no additional limitations except for those mentioned in Limitations and Differences.
11.27.2 Features Codes on Thomson ST2030S
This section presents the feature codes for PBX Services accessible during a call specific to the
Thomson ST2030S SIP Phone and serves as a supplement to
Quadro Feature Codes on IP
Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold
Call Waiting
Call Blind Transfer

dial the number

Call Transfer with Consultation

dial the number


consult

Call Conference

dial the number


To Put a Call on Hold
During a call, press . To resume a held call, press .
To Accept a Second Incoming Call
When the phone is ringing, press or the line with a blinking LED. The phone will put the call
in progress on hold and pick up an incoming call.
To switch between the active and held calls, press the line key (F1, F2, etc.) associated with a call
or scroll to the line and press
.
To Blind Transfer a Call
During a call, press . The phone will put the call in progress on hold.
Dial the phone number that the call on hold is to be transferred to and press
.
To Transfer a Call with Consultation
During a call, press . The phone will put the call in progress on hold.
Dial the phone number that the call on hold is to be transferred to and press
. Consult the
called party, for example to announce the incoming call.
Press
to transfer the call on hold to the called number or press to resume the held
call.