User`s guide
Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 63 10-Dec-12
11.25 Grandstream GXV3175
11.25.1 Limitations Specific to Grandstream GXV3175
In order to make video calls you need to go Quadro’s menu and enable video codec of that
extension, on which your Grandstream GXV3175 phone is set.
There are no additional limitations except for those mentioned in
Limitations and Differences.
11.25.2 Features Codes on Grandstream GXV3175
This section presents the feature codes for PBX Services accessible during a call specific to the
Grandstream GXV3175 Phone and serves as a supplement to
Quadro Feature Codes on IP
Phone . s
PBX Services accessible during a call Keys/Soft Keys
Call Hold Hold
Call Waiting Line key of new incoming call
Call Blind Transfer
Trnf
dial the number
Send
Call Transfer with Consultation
free line soft key dial the number Trnf Line
in hold
Call Conference
free line soft key
dial the number
Conf
Yes
To Put a Call on Hold
During the call press the “Hold” button to place your active call on hold. The line icon will become
yellow after call hold. Press the “Unhold” button to return to the call. After call hold, users could
select another line to make calls. If there is another call coming in, the user will be able to select
“Accept” or “Reject” in the right hand side of the screen.
To Accept a Second Incoming Call
When the line is busy, the user hears a call waiting tone notifying the user that a call is waiting
and the notification about new incoming call will be displayed on the phone. Users may toggle
between the multiple calls by pressing the Line button and selecting the line they wish to answer.
To Blind Transfer a Call
1. During a call press the button for additional functions and then the “Trnf” button to
place the other party on hold. The phone will display the following message: “Dial Number
(Blind) OR Select Line (Attended)”.
2. Dial the extension number and press “SEND”. This will transfer the call to the other party
immediately.
To Transfer a Call with Consultation
During a call, select another line to establish a call with the third party using the same account.
This will put the previous line (Line 1) on hold. Dial the number of new destination and press
“Audio Call” or “Video Call” button. When the second call is established, press the
button for
additional functions and press the “Trnf” button. The message: “Dial Number (Blind) OR Select
Line (Attended)” will show up in the screen and bellow this message the button with the held call
will appear. Then select line button corresponding with the held call to finish attended transfer.