User`s guide
Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 61 10-Dec-12
11.24 Grandstream GXV3140
11.24.1 Limitations Specific to Grandstream GXV3140
In order to make video calls you need to go Quadro’s menu and enable video codec of that
extension, on which is set your Grandstream GXV3140 phone.
There are no additional limitations except for those mentioned in
Limitations and Differences.
11.24.2 Features Codes on Grandstream GXV3140
This section presents the feature codes for PBX Services accessible during a call specific to the
Grandstream GXV3140 Phone and serves as a supplement to
Quadro Feature Codes on IP
Phones.
PBX Services accessible during a call Keys/Soft Keys
Call Hold Hold
Call Waiting Line button -> corresponding line soft key
Call Blind Transfer
Transfer
dial the number
Send
Call Transfer with Consultation
Line -> free line soft key -> dial the number
Transfer
Call Conference
Line -> free line soft key -> dial the number
Conference
Line button -
> corresponding line
soft key
To Put a Call on Hold
During the call press the “HOLD” button
to place your active call on hold. Press the “Hold”
button again or press the “Resume” softkey to return to the call. Users can also select the
line placed on hold to resume the call (by pressing the “LINE” button
and then the key
corresponding to held line).
To Accept a Second Incoming Call
When the line is busy, the user hears a call waiting tone notifying the user that a call is waiting
and the notification about incoming call on the phones display. Press the “Accept” softkey to
answer the second incoming call. Users may toggle between the multiple calls by pressing the
“LINE” button
and selecting the line they wish to answer.
To Blind Transfer a Call
1. Press the “CALL TRANSFER” button to place the other party on hold. The phone will
display the following message: “Dial Number (Blind) OR Select Line (Attended)”.
2. Dial the extension number and press “Send” softkey or
button. This will transfer the
call to the other party immediately.