User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 49 10-Dec-12
11.16 Swissvoice IP 10S
11.16.1 Limitations Specific to Swissvoice IP 10S
The Swissvoice IP 10S SIP-phone does not support the Call Conferencing feature. See also
Limitations and Differences.
11.16.2 Feature Codes on Swissvoice IP 10S
This section presents the feature codes for PBX Services accessible during a call specific to
Swissvoice IP 10S and serves as a supplement to
Quadro Feature Codes on IP Phones.
PBX Services accessible during a call
Keys/Soft Keys
Call Hold L2/OK
Call Waiting OK
Call Blind Transfer Blind Transfer (from Services)
Call Transfer with Consultation Transfer(from Services)
To Put a Call on Hold
There are two options of putting a call on hold:
1. During a call, press the OK soft key to put the call on hold and receive a dial tone. You can
make a second call while the first one is on hold.
2. During a call, press the key with a white dot and select the Hold sub-item by pressing OK.
The party is put on hold but a dial tone is not provided on the line.
To resume the held call, press OK again.
To Accept a Second Incoming Call
Press the OK key to put the call in progress on hold and accept an incoming call.
To terminate the call in progress and resume the held one, press the key C. To put the call in
progress on hold and resume the held one, go up one level by using the upward arrow key and
press OK.
To Blind Transfer a Call
During a call, press the key with a white dot.
Select the Blind Transfer sub-item using the arrow keys and press OK. The call in progress is put
on hold and a dial tone is provided on the line enabling you to make a call.
Dial a phone number that the call is to be transferred to and press OK. The person on hold is
transferred to the specified destination.
To Transfer a Call with Consultation
During a call, press OK to switch to a free line. The call in progress is put on hold.
Dial a number that the held call is to be transferred to.
Press the key with a white dot and select the Transfer sub-item followed by OK. Use the arrow
keys to move up or down through the menu items. The held party will be transferred to the called
number.