User`s guide
Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 44 10-Dec-12
11.12 Cisco IP Phone SPA303
11.12.1 Limitations Specific to Cisco IP Phone SPA303
There are no additional limitations except for those mentioned in
11.12.2 Feature Codes on Cisco IP Phone SPA303
Limitations and Differences.
This section presents the feature codes for PBX Services accessible during a call specific to
Cisco IP Phone SPA303 and serves as a supplement to
Quadro Feature Codes on IP Phones.
To Put a Call on Hold
During a call, press the Hold button to place the call on hold and press the flashing green line
button to answer the incoming call. To resume the first call, select it using the Up/Down
navigation button or the corresponding blinking (red light) LINE button.
To Accept a Second Incoming Call
To answer the incoming second call press the corresponding blinking (red light) LINE button, this
automatically places the active call on hold.
To Blind Transfer a Call
• During an active call, press the bXfer softkey.
• Enter the number to which you want to transfer the call and press the dial softkey. The call
is transferred with no further action required on your part.
To Transfer a Call with Consultation
1. During an active call, press xfer softkey. The call is placed on hold and a new line is
opened to dial the number.
2. Enter the number to which you want to transfer the call, then press the dial softkey or
wait a few seconds.
3. Press the xfer softkey after the phone begins to ring, or at any time after the phone is
answered.
To Set up a Conference Call
1. During an active call press the Confrn softkey. This puts the call in progress on hold.
2. Dial the phone number of the second party and press the Dial softkey.
PBX Services accessible during a call
Keys/Soft Keys
Call Hold Hold
Call Waiting Line key with a blinking LED
Call Blind Transfer
more
Xfer
dial the number
dial
Call Transfer with Consultation
Xfer
dial the number
dial
Xfer
Call Conference
Confrn
dial the number
dial
call
establishment
Confrn