User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 40 10-Dec-12
The following screen, with the Blind soft key, displays.
2. Press the Blind soft key, and then place a call to the party to whom you want to transfer the
call. (If you want to cancel the transfer before the call is placed, and return to the original call,
press the Cancel soft key.)
The call automatically transfers to the party you specified.
To Transfer a Call with Consultation
1. During a call, press the Trnsfer soft key. The active call is placed on hold.
2. Place a call to the party to whom you want to transfer the call.
3. When you hear the ring-back sound, press the Trnsfer soft key. The transfer is complete. If
you want to talk privately to the person to whom you are transferring the call before the
transfer is complete, wait until the person answers the call, talk to the person, and then
press the Trnsfer soft key. To cancel the transfer before the call connects, press the Cancel
soft key.
To Set up a Conference Call
You can set up a conference in one of two ways:
• Using the Confrnc soft key
.
• Using the Join soft key, if you have an active call and a call on hold.
Note* to end a call on hold, you must resume the call first.
Setting Up a Conference Using the Conference Soft Key
To set up a conference using the Conference soft key:
1. Call the first party.
2. Press the Confrnc soft key
. The active call is placed on hold.
3. Enter the number of the second party, and then press the Send soft key.
4. When the second party answers, press the Confrnc soft key
to join all parties in the
conference.
The Active: Conference screen displays.
Setting Up a Conference with an Active Call and a Call on Hold
If you are currently in an active call, and you have another call on hold, you can create a
conference call between the active call, the call on hold, and yourself, by pressing the Join soft
key.
To set up a conference call with an active call and a call on hold:
If you have an active call and a call on hold, scroll to either call, and then press the Join soft key.
The Active: Conference screen displays.
A conference is created with the active call, the call on hold, and yourself.