User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 38 10-Dec-12
2. Place a call to the party to whom you want to transfer the call.
3. When you hear the ring-back sound, press the Transfer soft key or press
. If you want to
talk privately to the person to whom you are transferring the call before the transfer is
complete, wait until the person answers the call, talk to the person, and then press the
Transfer soft key or press
.
If you are using a handset, the transfer can be completed by putting the handset on the cradle.
You can cancel the transfer before the call connects by pressing the Cancel soft key.
To Set up a Conference Call
You can set up a conference in one of two ways:
• Using the Conference soft key or. The participant with whom you will exchange video is the
participant you most recently added to the conference (if the party can exchange video).
1. Call the first party.
2. Press the Conference soft key or press
to create a new call. The active call is
placed on hold.
The Conference with: screen displays.
3. Call the second party.
4. When the second party answers, press the Conference soft key or press
again
to join all parties in the conference.
• Using the Join soft key, if you have an active call and one call on hold (on the same or another
Line Key). The participant with whom you will exchange video is the party who was previously on
hold (if the party can exchange video).
If you have an active call and a call on hold (either on the same Line Key or a different
Line Key), press the Join soft key.
To end a conference call:
During a conference call, press the End Call soft key.
The other parties remain connected.
11.9.3 Additional Features Supported on Polycom® VVX 1500
The following additional features are supported:
• Auto Provisioning (we generate configuration file based on the MAC address entered from
Quadro GUI);
• PnP with Quadro;
• Paging/Intercom (starting from Quadro 5.1.x software).