User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 36 10-Dec-12
11.9 Polycom® VVX 1500
11.9.1 Limitations Specific to Polycom® VVX 1500
In order to make video calls you need to go Quadro’s menu and enable video codec of that
extension, on which is set your Polycom® VVX 1500.
There are no additional limitations except for those mentioned in
Limitations and Differences.
11.9.2 Features Codes on Polycom® VVX 1500
This section presents the feature codes for PBX Services accessible during a call specific to
Polycom® VVX 1500 and serves as a supplement to
PBX Services accessible during a call
Quadro Feature Codes on IP Phones.
Keys/Soft Keys
Call Hold
Hold
Call Waiting
Hold  Answer
Call Blind Transfer

Blind soft key

number

or
Call Transfer with Consultation
 number -> or 
Call Conference
Confrnc

Dial

or

Confrnc
To Put a Call on Hold
To place a call on hold, press the Hold soft key or press during an active call. When you
place a call on hold, the following happens:
• The hold icon
, will display on the Line Key.
• The Line Key status indicator will flash red.
• The call’s window is minimized and placed in the inactive call group (above the soft keys).
The inactive call window displays “Hold.”
The following figure shows a call with Joan Smith on hold. The hold icon, and the flashing red
status indicator, display on the Line Key.
Press the Resume soft key, or press again, to retrieve the call.