User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 30 10-Dec-12
11.6 Polycom SoundPoint IP 330/331/335
11.6.1 Limitations Specific to Polycom SoundPoint IP 330/331/335
There are no additional limitations except for those mentioned in Limitations and Differences.
11.6.2 Features Codes on Polycom SoundPoint IP 330/331/335
This section presents the feature codes for PBX Services accessible during a call specific to
Polycom SoundPoint IP 330/331/335 and serves as a supplement to
Quadro Feature Codes
on IP Phones.
PBX Services accessible during a call
Keys/Soft Keys
Call Hold Hold (the key is also possible)
Call Waiting Hold
Call Blind Transfer
More

Trnsfr

Blnd
Call Transfer with Consultation
More

Trnsfr

Dial

Trnsfr
Call Conference
More

Conf

Dial

Conf
To Put a Call on Hold
During a call, press either the Hold key on the keypad or the Hold soft key. To resume the held
call, press Resume.
To Accept a Second Incoming Call
Put a call in progress on hold.
Use the arrow keys on the keypad to receive a second call. Press Answer to receive the call.
To Blind Transfer a Call
During a call, press the More soft key, then Trnsfr. This puts the call in progress on hold.
Press Blind to receive a dial tone.
Dial the phone number that the call on hold is to be transferred to and press Dial. You will be
disconnected automatically from both calls.
To Transfer a Call with Consultation
During a call, press the More soft key, then Trnsfr. This puts the call in progress on hold.
Dial the phone number that the call on hold is to be transferred to and press Dial. Consult the
called party.
Press Trnsfr again to transfer the call on hold to the called number. You will be automatically
disconnected from both calls.
To Set up a Conference Call
During a call, press the More soft key, then Conf. This puts the call in progress on hold.
Dial the phone number that the call on hold is to be transferred to and press Dial.
Press Conf to join both calls into a conference call.