User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 24 10-Dec-12
11.1 snom 190
11.1.1 Limitations Specific to snom 190
When configured as a receptionist with the Password Protection feature enabled, snom190
cannot pick up a second incoming call from the watched extensions.
To pick up the call press Hold (R), select the call using < ; > buttons and press OK.
See also section
Limitations and Differences.
11.1.2 Feature Codes on snom 190
This section presents the feature codes for PBX Services accessible during a call specific to
snom190 and serves as a supplement to
Quadro Feature Codes on IP Phones.
PBX Services accessible during a call
Keys/Soft Keys
Call Hold R/Hold
Call Waiting Key with a blinking LED
Call Blind Transfer,
Call Transfer with Consultation
“Xfer”
1
Call Conference
or Transfer
“Cnf.On”
To Put a Call on Hold
During a call, press the R/Hold key. This puts the call in progress on hold and provides a dial
tone on a free line. To make a new call while another is on hold, dial your desired phone number.
To resume a call on hold, press either the R/Hold key again or the line key associated with the
held call.
You can also put a call on hold and immediately receive a dial tone by pressing any free line key.
To Accept a Second Incoming Call
Press the key with a blinking LED. This puts the call in progress on hold and receives an incoming
call.
To terminate the call in progress and resume the one on hold, press Cancel. To put the call in
progress on hold and resume the one on hold, press the key with a blinking LED.
To Blind Transfer a Call
During a call, press the soft key “Xfer” to put the call party on hold and receive a dial tone.
Dial the phone number that the call is to be transferred to and press OK. The call party on hold
will be transferred to the specified destination.
To Transfer a Call with Consultation
During a call, press the Hold key. This puts the call in progress on hold and provides a dial tone.
Dial the phone number that the call is to be transferred to. Consult the called party.
Press the soft key “Xfer” or hang up the handset to connect the person on hold to the called
party.
1
The names of soft keys are in quotes.