User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 104 10-Dec-12
12.2.11 Easy Login/Logout (used by ACD Agent to easy login or
logout to all groups where it is subscribed to)
See the feature codes .
12.2.12 To Activate and Configure No Answer Call Forwarding Service
If preliminarily configured:
• dialling
 will activate the No Answer Call Forwarding service with the settings
specified for Any Address on the Caller ID Based Services page (User login
Supplementary Services). Use the same key combination to deactivate the service.
• dialling
 will toggle (enable or disable) the No Answer Call Forwarding service.
• dialling
 will change the forwarding number
Please Note: If no No Answer Call Forwarding is configured for Any Address, the system will not
activate the forwarding service and a voice message will ask to configure the forwarding settings
first.
12.2.13 Access to the Shared Mailboxes
The Shared Mailboxes feature code is used to access other extension's mailboxes on the Quadro.
If the mailbox is configured as shared, no password will be prompted to enter it. Otherwise, the
corresponding extension's password will be prompted to enter its mailbox. The mailbox can be
configured as shared either by administrator from Extension's Management - Voice Mailbox
Settings page or by the extension's user from Many Extension Ringing page.
Press
.
Dial the other extension's number to enter its mailbox and press #.
Dial the password, if prompted, and press # or get a direct access to the extension's mailbox.
Once entered the other extension's mailbox, you will get all the same menu options and
functionality as you have in your own mailbox. For more details on the functionality, see Feature
Codes.
12.2.14 Barge in
Depending on the Barge In service configuration in the Extensions Management -> General
Settings, you may be capable to use one or all the Barge In Feature Codes.
For Listen in service, press
+ extension number + #.
For Whisper service, press
+ extension number + #.
For Barge in service, press
 + extension number + #.