User`s guide

Epygi Technologies Quadro Features on Epygi Tested IP Phones List
PAGE 100 10-Dec-12
12 Appendix 1
This section presents the feature codes for PBX services accessible at the dial tone and Auto
Attendant services.
12.1 Establishing a call
To establish a call, dial the appropriate Routing Number. The Routing Numbers and the
available routes to/from/through Quadro are listed in the Local Routing Table configured and
managed by the Quadro’s administrator. For information about routing rules, please refer to your
Quadro’s administrator.
To establish a call using Speed Calling service dial the pound (
) and the pre-configured Calling
Code (a suitable key combination of two digits).
Please Note: You may accelerate establishing a connection by using the pound (
) sign dialed at
the end of the number.
12.2 PBX Services Accessible at the Dial Tone
The table below presents the feature codes for PBX services accessible at the dial tone and
characterized by starting with the key
.
Services Keys
Enter Voice Mail System

Busy Autoredial

Call Back

Forwarding
Activating/deactivating and configuring

Do Not Disturb
Activating/deactivating

Block Last Caller
(Within 10 sec. after terminating the call)

Getting the line Information

Administrator login

Configuring speed calling from
handset

Call Routing Management

Hot Desking
