Epygi Technologies Quadro Features on Epygi Tested IP Phones List Revision: 3.2 Abstract: This document explains how to use Quadro telephony services on IP phones tested with the Quadro Please Note: This document contains confidential and proprietary information owned by Epygi Technologies Ltd. Any copying, use or disclosure of the document or the information contained herein without the written permission of Epygi Technologies Ltd. is strictly prohibited.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Table of Contents: Quadro Features on Epygi Tested IP Phones List ..................................... 1 1 Introduction ..................................................................................... 9 2 IP Phone Testing Policy .................................................................... 9 3 References .......................................................................................
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.8 Polycom SoundPoint IP 601/650 .................................................................... 34 11.8.1 Limitations Specific to Polycom SoundPoint IP 601/650 .............................. 34 11.8.2 Features Codes on Polycom SoundPoint IP 601/650 ................................... 34 11.8.3 Additional Features Supported on Polycom SoundPoint IP 601/650 .............. 35 11.9 Polycom® VVX 1500 .....................................
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.19.1 Limitations Specific to Grandstream GXP2000/GXP2100/GXP2110/ GXP2120 Phone ................................................................................. 53 11.19.2 Features Codes on Grandstream GXP2000/GXP2100/GXP2110/ GXP2120 Phone ................................................................................. 53 11.20 Grandstream GXP2124 Phone .................................................................... 55 11.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.31.1 Limitations Specific to snom m3 ........................................................... 71 11.31.2 Features Codes on snom m3 ............................................................... 71 11.32 Telematrix IP550 Spectrum Plus................................................................. 74 11.32.1 Limitations Specific to Telematrix IP550 Spectrum Plus........................... 74 11.32.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.43.2 11.44 Features Codes on Alcatel Temporis IP 800 Phone .................................. 92 AudioCodes 310HD ................................................................................... 93 11.44.1 Limitations Specific to AudioCodes 310HD Phone ................................... 93 11.44.2 Features Codes on AudioCodes 310HD Phone ........................................ 93 11.45 AudioCodes 320HD ......................
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 12.2.15 Intercept......................................................................................... 105 12.2.16 Voice Mail Services ........................................................................... 106 12.3 Feature Codes on Auto Attendant ................................................................ 108 12.3.1 Administrator Login .............................................................................
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Document Revision History Revision Date Description Valid for models 1.0 15-Jan-07 Split from the Using Quadro Features on IP Phones document IP PBXs 1.1 24-Aug-07 New tested phones added IP PBXs 1.2 22-Apr-08 Tested phones update IP PBXs 1.3 04-Sep-08 Linksys IP phones added IP PBXs 2.0 22-Sep-08 POLYCOM IP phones added IP PBXs 2.1 25-Feb-09 2.2 01-Jun-09 2.3 11-Sep-09 New tested phones added IP PBXs 2.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 1 Introduction This document explains the use of Quadro telephony services on SIP phones which have been tested to be used with the Quadro but have not been listed on Epygi fully supported IP phone list. Fully supported IP phones are tightly integrated with the Quadro and are listed in a separate document.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 5 SIP Phones Tested with the Quadro The table below lists the SIP phones that have been tested for interoperability with the Quadro. Vendor Model Software Version CISCO SPA303 7.4.8 CISCO SPA525G2 7.4.8 CISCO SPA501G 7.4.8 CISCO SPA509G 7.4.8 POLYCOM SoundPoint IP 330SIP Application: SIP software 3.3.1.0933 POLYCOM SoundPoint IP 331SIP Application: SIP software 3.3.1.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Vendor Model Software Version Grandstream GXP2120 Program- 1.0.1.83 Grandstream GXP2124 Program- 1.0.4.10 Grandstream HT286 Program- 1.1.0.26 Grandstream GXV3140 Application version: 1.0.7.3 Grandstream GXV3175 Program- 1.0.3.22 Yealink SIP T-20P SW version: 9.50.0.50 Yealink SIP T-22P SW version: 7.50.0.50 Yealink SIP T-26P SW version: 6.50.0.50 Yealink SIP T-28P SW version:2.50.0.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Vendor Model Software Version CISCO 7960 POS3-07-4.00 IpDialog SipToneII Application: SipTone 1.2.0 rc Z_21 POLYCOM SoundPoint IP 300SIP Application: SIP software 2.1.3 POLYCOM SoundPoint IP 501SIP Application: SIP software 3.1.3.0439 POLYCOM SoundPoint IP 601SIP Application: SIP software 3.1.3.0439 SIPUra SPA 841 Thomson ST2030S APP Version: V2.69 snom 190 Application: snom190-SIP 3.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Vendor Telematrix Model Software Version IP9600 MWD5 SW version: 1.7. 249.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 7 Quadro Features on Tested IP Phones Most of the Quadro IP PBX telephony services and features are applicable on both IP and FXS (analogue) phones. And most of them are identical to those on FXS (analogue) phones from the configuration and usage perspective. The limitations and differences regarding the configuration and functionality on FXS (analogue) phones are listed in Limitations and Differences.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List • Speed Dial Configuration from the Phone Handset • Outgoing call blocking from the Phone Handset • Call Emergency Interrupt • Caller ID • Hiding Caller ID • Hold music • Call Queue • User Permissions (Password Protection) • Call Transfer Blindly • Call Transfer with Consultation • Distinctive ringing • Paging • Intercom • Receptionist • Auto Provisioning for IP phones (generating the configuration file based on
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 8 Limitations and Differences 1. The Hotline service of the Quadro is not working on any of the tested SIP phones. 2. Some of the Quadro services are working with some limitations or slight differences on SIP phones compared to the way they are working on analogue phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 10 Quadro PBX Services Accessible during a call The feature codes for PBX services accessible during a call vary depending on the SIP phone. The exception is the Call Park and Directed Call Park features, which is common for all IP phones discussed below. To make a Call Park This service requires initial configuration from the Quadro web management. At least one extension should be configured as a call park extension.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11 Quadro IP PBX features overview for Tested IP phones The table below gives the current status for Quadro IP PBX features related to tested IP phones Quadro Features/ Tested IP phones snom m9 Polycom 300/ 330/ 331/ 335/ 450/ 501/ 550/ 601/ 650 IP6000/ VVX1500 Thomson ST2030S Grandstream GXP1400/ GXP1405/ GXP1450/ GXP2000/ GXP2100/ GXP2110/ GXP2120/ GXP2124/ GXV3140/ GXV3175 Yealink SIP-T20P / SIP-T22P / SIP-T28P / SIP-T26P / SIP-T32G
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Quadro Features/ Tested IP phones snom m9 Polycom 300/ 330/ 331/ 335/ 450/ 501/ 550/ 601/ 650 IP6000/ VVX1500 Thomson ST2030S Grandstream GXP1400/ GXP1405/ GXP1450/ GXP2000/ GXP2100/ GXP2110/ GXP2120/ GXP2124/ GXV3140/ GXV3175 Yealink SIP-T20P / SIP-T22P / SIP-T28P / SIP-T26P / SIP-T32G / SIP-T38G Audicodes 310HD/ 320HD Alcatel Temporis IP 200/ 600/800 Telematrix IP550/ 3300IP/ 9600IPMWD5 Linksys SPA942/ SPA941/ SPA922/ SPA921/ SPA
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Quadro Features/ Tested IP phones snom m9 Polycom 300/ 330/ 331/ 335/ 450/ 501/ 550/ 601/ 650 IP6000/ VVX1500 Thomson ST2030S Grandstream GXP1400/ GXP1405/ GXP1450/ GXP2000/ GXP2100/ GXP2110/ GXP2120/ GXP2124/ GXV3140/ GXV3175 Yealink SIP-T20P / SIP-T22P / SIP-T28P / SIP-T26P / SIP-T32G / SIP-T38G Audicodes 310HD/ 320HD Alcatel Temporis IP 200/ 600/800 Telematrix IP550/ 3300IP/ 9600IPMWD5 Linksys SPA942/ SPA941/ SPA922/ SPA921/ SPA
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Quadro Features/ Tested IP phones snom m9 Polycom 300/ 330/ 331/ 335/ 450/ 501/ 550/ 601/ 650 IP6000/ VVX1500 Thomson ST2030S Grandstream GXP1400/ GXP1405/ GXP1450/ GXP2000/ GXP2100/ GXP2110/ GXP2120/ GXP2124/ GXV3140/ GXV3175 Yealink SIP-T20P / SIP-T22P / SIP-T28P / SIP-T26P / SIP-T32G / SIP-T38G Audicodes 310HD/ 320HD Alcatel Temporis IP 200/ 600/800 Telematrix IP550/ 3300IP/ 9600IPMWD5 Linksys SPA942/ SPA941/ SPA922/ SPA921/ SPA
Epygi Technologies Quadro Features/ Tested IP phones snom m9 Quadro Features on Epygi Tested IP Phones List Polycom 300/ 330/ 331/ 335/ 450/ 501/ 550/ 601/ 650 IP6000/ VVX1500 Thomson ST2030S Grandstream GXP1400/ GXP1405/ GXP1450/ GXP2000/ GXP2100/ GXP2110/ GXP2120/ GXP2124/ GXV3140/ GXV3175 Yealink SIP-T20P / SIP-T22P / SIP-T28P / SIP-T26P / SIP-T32G / SIP-T38G Audicodes 310HD/ 320HD Alcatel Temporis IP 200/ 600/800 Telematrix IP550/ 3300IP/ 9600IPMWD5 Linksys SPA942/ SPA941/ SPA922/ SPA921/ SPA
Epygi Technologies Quadro Features/ Tested IP phones snom m9 Quadro Features on Epygi Tested IP Phones List Polycom 300/ 330/ 331/ 335/ 450/ 501/ 550/ 601/ 650 IP6000/ VVX1500 Thomson ST2030S except 501, 601) Yes Grandstream GXP1400/ GXP1405/ GXP1450/ GXP2000/ GXP2100/ GXP2110/ GXP2120/ GXP2124/ GXV3140/ GXV3175 Yealink SIP-T20P / SIP-T22P / SIP-T28P / SIP-T26P / SIP-T32G / SIP-T38G Audicodes 310HD/ 320HD Alcatel Temporis IP 200/ 600/800 Telematrix IP550/ 3300IP/ 9600IPMWD5 Linksys SPA942/ SPA94
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.1 snom 190 11.1.1 Limitations Specific to snom 190 When configured as a receptionist with the Password Protection feature enabled, snom190 cannot pick up a second incoming call from the watched extensions. To pick up the call press Hold (R), select the call using < ; > buttons and press OK. See also section Limitations and Differences. 11.1.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Set up a Conference Call When the phone is connected with two calls, one on hold and one active, press the function key “Cnf.On” to connect all three parties for a conference call. Pressing the function key “Cnf.Off” during a conference call disconnects the conference call and drops the calls.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.2 snom 200 11.2.1 Limitations Specific to snom 200 There are no additional limitations except for those mentioned in Limitations and Differences. 11.2.2 Features Codes on snom 200 This section presents the feature codes for PBX Services accessible during a call specific to snom 200 and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.3 snom 220 11.3.1 Limitations Specific to snom 220 There are no additional limitations except for those mentioned in Limitations and Differences. 11.3.2 Features Codes on snom 220 This section presents the feature codes for PBX Services accessible during a call specific to snom 220 and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.4 snom PA1 11.4.1 Limitations Specific to snom PA1 There are no additional limitations except for those mentioned in Limitations and Differences. 11.4.2 Features Codes on snom PA1 There are no feature codes specific to snom PA1 as it is only a paging device. Dial the phone number of the snom PA1 and, when your phone shows that you are connected, speak your announcement into its handset/headset/casing microphone.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.5 snom m9 11.5.1 Limitations Specific to snom m9 There are no additional limitations except for those mentioned in Limitations and Differences. 11.5.2 Features Codes on snom m9 This section presents the feature codes for PBX Services accessible during a call specific to snom m9 and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.6 Polycom SoundPoint IP 330/331/335 11.6.1 Limitations Specific to Polycom SoundPoint IP 330/331/335 There are no additional limitations except for those mentioned in Limitations and Differences. 11.6.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.6.3 Additional Features Supported on Polycom SoundPoint IP 330/331/335 The following additional features are supported: • Auto Provisioning (we generate configuration file based on the MAC address entered from Quadro GUI); • PnP with Quadro; • Paging/Intercom (starting from Quadro 5.1.x software).
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.7 Polycom SoundPoint IP 450/501/550 11.7.1 Limitations Specific to Polycom SoundPoint IP 450/501/550 There are no additional limitations except for those mentioned in Limitations and Differences. 11.7.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.7.3 Additional Features Supported on Polycom SoundPoint IP 450/501/550 The following additional features are supported: • Auto Provisioning (we generate configuration file based on the MAC address entered from Quadro GUI); • PnP with Quadro; • Paging/Intercom (starting from Quadro 5.1.x software).
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.8 Polycom SoundPoint IP 601/650 11.8.1 Limitations Specific to Polycom SoundPoint IP 601/650 There are no additional limitations except for those mentioned in Limitations and Differences. 11.8.2 Features Codes on Polycom SoundPoint IP 601/650 This section presents the feature codes for PBX Services accessible during a call specific to Polycom SoundPoint IP 601 and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.8.3 Additional Features Supported on Polycom SoundPoint IP 601/650 The following additional features are supported: • Auto Provisioning (we generate configuration file based on the MAC address entered from Quadro GUI); • PnP with Quadro; • Paging/Intercom (starting from Quadro 5.1.x software).
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.9 Polycom® VVX 1500 11.9.1 Limitations Specific to Polycom® VVX 1500 In order to make video calls you need to go Quadro’s menu and enable video codec of that extension, on which is set your Polycom® VVX 1500. There are no additional limitations except for those mentioned in Limitations and Differences. 11.9.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List If you have more than one call on hold, press the call you want to resume, and then press the Resume soft key. If you press the Line Key, the first call in the inactive call group for the Line Key will automatically resume. To Accept a Second Incoming Call Put a call in progress on hold. Use the arrow keys on the keypad to receive a second call. Press Answer to accept the call.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 2. Place a call to the party to whom you want to transfer the call. . If you want to 3. When you hear the ring-back sound, press the Transfer soft key or press talk privately to the person to whom you are transferring the call before the transfer is complete, wait until the person answers the call, talk to the person, and then press the Transfer soft key or press .
Epygi Technologies 11.10 Quadro Features on Epygi Tested IP Phones List Polycom SoundStation IP 6000 11.10.1 Limitations Specific to Polycom SoundStation IP 6000 There are no additional limitations except for those mentioned in Limitations and Differences. 11.10.2 Features Codes on Polycom SoundStation IP 6000 This section presents the feature codes for PBX Services accessible during a call specific to Polycom SoundStation IP 6000 and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List The following screen, with the Blind soft key, displays. 2. Press the Blind soft key, and then place a call to the party to whom you want to transfer the call. (If you want to cancel the transfer before the call is placed, and return to the original call, press the Cancel soft key.) The call automatically transfers to the party you specified. To Transfer a Call with Consultation 1. During a call, press the Trnsfer soft key.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.10.3 Additional Features Supported on Polycom SoundStation IP 6000 The following additional features are supported: • Auto Provisioning (we generate configuration file based on the MAC address entered from Quadro GUI); • PnP with Quadro; • Paging/Intercom (starting from Quadro 5.1.x software).
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.11 Cisco IP Phone 7960 11.11.1 Limitations Specific to Cisco IP Phone 7960 The phone does not support the speed dialling feature of Quadro. It gets a busy tone after pressing the pound sign (#). See also section Limitations and Differences. 11.11.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Set up a Conference Call During a call, press the soft key Conf. This puts the call in progress on hold. Dial a third participant’s phone number and press the soft key Dial. Consult the called party. Press Join to set a conference call with both parties. If you choose to terminate the conference call by pressing End Call, the other two parties in the conference can still continue the call.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.12 Cisco IP Phone SPA303 11.12.1 Limitations Specific to Cisco IP Phone SPA303 There are no additional limitations except for those mentioned in Limitations and Differences. 11.12.2 Feature Codes on Cisco IP Phone SPA303 This section presents the feature codes for PBX Services accessible during a call specific to Cisco IP Phone SPA303 and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 3. Then press the Confrn softkey again. Now, all three parties are connected in the conference. When you hang up, the other two parties are disconnected. You can cancel the conference by pressing the EndCall softkey before connecting the calls, then press the corresponding blinking (red light) LINE button to resume the original call.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.13 Cisco IP Phone SPA525G2 11.13.1 Limitations Specific to Cisco IP Phone SPA525G2 There are no additional limitations except for those mentioned in Limitations and Differences. 11.13.2 Feature Codes on Cisco IP Phone SPA525G2 This section presents the feature codes for PBX Services accessible during a call specific to Cisco IP Phone SPA525G2 and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.14 Cisco IP Phone SPA501G 11.14.1 Limitations Specific to Cisco IP Phone SPA501G There are no additional limitations except for those mentioned in Limitations and Differences. 11.14.2 Feature Codes on Cisco IP Phone SPA501G This section presents the feature codes for PBX Services accessible during a call specific to Cisco IP Phone SPA501G and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.15 Cisco IP Phone SPA509G 11.15.1 Limitations Specific to Cisco IP Phone SPA509G There are no additional limitations except for those mentioned in Limitations and Differences. 11.15.2 Feature Codes on Cisco IP Phone SPA509G This section presents the feature codes for PBX Services accessible during a call specific to Cisco IP Phone SPA509G and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.16 Swissvoice IP 10S 11.16.1 Limitations Specific to Swissvoice IP 10S The Swissvoice IP 10S SIP-phone does not support the Call Conferencing feature. See also Limitations and Differences. 11.16.2 Feature Codes on Swissvoice IP 10S This section presents the feature codes for PBX Services accessible during a call specific to Swissvoice IP 10S and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.17 IpDialog SipTone II 11.17.1 Limitations Specific to IpDialog SipTone II There are no additional limitations except for those mentioned in Limitations and Differences. 11.17.2 Feature Codes on IpDialog SipTone II This section presents the feature codes for PBX Services accessible during a call specific to IpDialog SipTone II and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.18 Grandstream BT100/200 11.18.1 Limitations Specific to Grandstream BT100/200 There is a licensing limitation for G.729 codec on the GrandStream phones (only 2 G.729 codec channels are supported). It is impossible to initiate conference on the phone when all participants are using the G.729 codec. See also Limitations and Differences. 11.18.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Accept a Second Incoming Call If call waiting feature is enabled on the Quadro, a call waiting tone (stutter tone) will alert the caller to an incoming call. Press the FLASH key or HOOK switch to place the current party on hold and switch to the incoming call. Press the FLASH key or HOOK switch to toggle between two active calls.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.19 Grandstream GXP2000/GXP2100/GXP2110/GXP2120 Phone 11.19.1 Limitations Specific to Grandstream GXP2000/GXP2100/ GXP2110/GXP2120 Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.19.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To end a conference, press HOLD. This breaks the conference and places both parties on hold. To speak with an individual party, select the corresponding blinking LINEx.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.20 Grandstream GXP2124 Phone 11.20.1 Limitations Specific to Grandstream GXP2124 Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.20.2 Features Codes on Grandstream GXP2124 Phone This section presents the feature codes for PBX Services accessible during a call specific to the Grandstream GXP2000/GXP2124 Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies 11.21 Quadro Features on Epygi Tested IP Phones List Grandstream GXP1400/GXP1405/GXP1450 Phone 11.21.1 Limitations Specific to Grandstream GXP1400/GXP1405/ GXP1450 Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.21.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.22 Grandstream HT286 11.22.1 Limitations Specific to Grandstream HT286 HandyTone-286 is a VoIP Analog Telephone Adaptor designed to work with an ordinary analog telephone. There are no additional limitations except for those mentioned in Limitations and Differences. 11.22.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 3. If C answers the call, A and C are in conversation. Then A can hang up to complete transfer. 4. If C does not answer the call, A can press “flash” back to talk to B. To Set up a Conference Call Assuming that call party A and B are in conversation. A (HT-286) wants to bring C in a conference: 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone. 2.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.23 Grandstream HT386 11.23.1 Limitations Specific to Grandstream HT386 HandyTone-386 is a VoIP Analog Telephone Adaptor designed to work with an ordinary analog telephone. There are no additional limitations except for those mentioned in Limitations and Differences. 11.23.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 4. If C does not answer the call, A can press “flash” back to talk to B. To Set up a Conference Call Assuming that call party A and B are in conversation. A (HT-286) wants to bring C in a conference: 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone. 2. A dials C’s number then # (or wait for 4 seconds). 3. If C answers the call, then A presses FLASH to bring B, C in the conference. 4.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.24 Grandstream GXV3140 11.24.1 Limitations Specific to Grandstream GXV3140 In order to make video calls you need to go Quadro’s menu and enable video codec of that extension, on which is set your Grandstream GXV3140 phone. There are no additional limitations except for those mentioned in Limitations and Differences. 11.24.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Transfer a Call with Consultation Press the “LINE” button to select an idle line to use for transfer; this will place the other party on hold immediately. After pressing the soft key of corresponding free Line, press the “LINE” button several times until the active account will be selected. Dial the number that you wish to transfer to and after confirmation from the party, press the “CALL TRANSFER” button.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.25 Grandstream GXV3175 11.25.1 Limitations Specific to Grandstream GXV3175 In order to make video calls you need to go Quadro’s menu and enable video codec of that extension, on which your Grandstream GXV3175 phone is set. There are no additional limitations except for those mentioned in Limitations and Differences. 11.25.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Set up a Conference Call During a call, select a free line by pressing “Line” button to call the second party using the same account. This will place the first call on hold. Dial the number of new destination and press “Audio Call” or “Video Call” button. Once the user has established the second call, press the button for additional functions and press the “Conf” button.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.26 Sipura SPA-841 IP Phone 11.26.1 Limitations Specific to SPA-841 IP Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.26.2 Feature Codes on SPA-841 IP Phone This section presents the feature codes for PBX Services accessible during a call specific to SPA-841 IP Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.27 Thomson ST2030S 11.27.1 Limitations Specific to Thomson ST2030S There are no additional limitations except for those mentioned in Limitations and Differences. 11.27.2 Features Codes on Thomson ST2030S This section presents the feature codes for PBX Services accessible during a call specific to the Thomson ST2030S SIP Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Set up a Conference Call During a call, press . The phone will put the call in progress on hold. Dial the third participant’s phone number and press After the call is set up, press . to join both calls into a conference. To drop a call participant, scroll to the corresponding line and press call, drop each participant one by one. PAGE 67 .
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.28 Berkshire 5000 (ATL 5000) IP phone 11.28.1 Limitations Specific to Berkshire 5000 There are no additional limitations except for those mentioned in Limitations and Differences. 11.28.2 Features Codes on Berkshire 5000 This section presents the feature codes for PBX Services accessible during a call specific to the Berkshire 5000 IP Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.29 Linksys SPA922/921 IP Phones 11.29.1 Limitations Specific to Linksys SPA922/921 There are no additional limitations except for those mentioned in Limitations and Differences. 11.29.2 Features Codes on Linksys SPA922/921 This section presents the feature codes for PBX Services accessible during a call specific to the Linksys SPA922 Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.30 Linksys SPA942/941 IP Phones 11.30.1 Limitations Specific to Linksys SPA942/94 There are no additional limitations except for those mentioned in Limitations and Differences. 11.30.2 Features Codes on Linksys SPA942/941 This section presents the feature codes for PBX Services accessible during a call specific to the Linksys SPA942 Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.31 snom m3 IP Phones 11.31.1 Limitations Specific to snom m3 Calls • The # key is not working for accelerating the dial process • When there is some notification on the display, the other notifications will not be shown until the active one will be canceled. For example if there is Missed Call notification, the New Voicemail notification will not come.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Put a Call on Hold Hold: To put a call in progress on hold, press the Hold softkey on the phone keypad. This puts the call in progress on hold. The screen displays "Call Held". While a call is on hold, you can make a second call by dialling your desired phone number. Please Note: Holding the call will not provide the dial-tone but it is possible to dial a number for second call.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 2. End Conference: To break the conference call press End conf. softkey. The conference call will be finished, the party (which was the active call when switching on the conference) will stay as active and the other party will be put into wait state. Please Note: The caller into wait state will not be held and will not hear any music on hold but will stay in silent. To terminate the conference call, press the Red Phone key.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.32 Telematrix IP550 Spectrum Plus 11.32.1 Limitations Specific to Telematrix IP550 Spectrum Plus • Voice Mail indication doesn’t work. • There is no support to switch between calls. • There isn’t any indication or reminder of missed calls. • Each time Quadro reboots, you need also to reboot Telematrix IP550. • You can’t use “Call Park” feature of Quadro.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.33 Telematrix IP3300/IP9600 MWD5 11.33.1 Limitations Specific to Telematrix IP3300/IP9600 MWD5 • There is no Menu key. • There is no support to switch between calls. • There isn’t any indication or reminder of missed calls. • Each time Quadro reboots, you need also to reboot Telematrix IP3300/IP9600. • You can’t use “Call Park” feature of Quadro.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.34 Yealink SIP-T20P 11.34.1 Limitations Specific to Yealink SIP-T20P There are no additional limitations except for those mentioned in Limitations and Differences. 11.34.2 Features Codes on Yealink SIP-T20P This section presents the feature codes for PBX Services accessible during a call specific to the Yealink SIP-T20P Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Set up a Conference Call You can establish a three-party conference, during the conversation three phone parties can communicate with each other. To establish a conference: 1. Press the CONF button during an active call. 2. The first call is placed on hold. You will hear a dial tone. Dial the number to conference in, then press #. 3. When the call is answered, the conference call will include you and the other two parties. 4.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.35 Yealink SIP-T22P 11.35.1 Limitations Specific to Yealink SIP-T22P There are no additional limitations except for those mentioned in Limitations and Differences. 11.35.2 Features Codes on Yealink SIP-T22P This section presents the feature codes for PBX Services accessible during a call specific to the Yealink SIP-T22P Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Set up a Conference Call You can establish a three-party conference, during the conversation three phone parties can communicate with each other. To establish a conference: 1. Press the Conf softkey during an active call. 2. The first call is placed on hold. You will hear a dial tone. Dial the number to conference in, then press #. 3. When the call is answered, the conference call will include you and the other two parties. 4.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.36 Yealink SIP-T26P/SIP-T28P 11.36.1 Limitations Specific to Yealink SIP-T26P/SIP-T28P There are no additional limitations except for those mentioned in Limitations and Differences. 11.36.2 Features Codes on Yealink SIP-T26P/SIP-T28P This section presents the feature codes for PBX Services accessible during a call specific to the Yealink SIP-T26P/SIP-T28P Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 2. When the phone is answered, you can have a private conversation without the first person hearing it, then hang up to complete the transfer. 3. You will be disconnected from the call. To Set up a Conference Call You can establish a three-party conference, during the conversation three phone parties can communicate with each other. To establish a conference: 1. Press the Conf softkey or the CONF button during an active call. 2.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.37 Yealink SIP-T32G 11.37.1 Limitations Specific to Yealink SIP-T32G There are no additional limitations except for those mentioned in Limitations and Differences. 11.37.2 Features Codes on Yealink SIP-T32G This section presents the feature codes for PBX Services accessible during a call specific to the Yealink SIP-T32G Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Blind Transfer a Call 1. Press the Tran button or Transfer softkey during the active conversation, the call will be on hold, there will be a dial tone. 2. Dial the other telephone number and press the Tran button or Transfer softkey. You will be disconnected from the call. To Transfer a Call with Consultation 1. Press the Tran button or Transfer softkey during the active conversation, the call will be on hold, there will be a dial tone.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.38 Yealink SIP-T38G 11.38.1 Limitations Specific to Yealink SIP-T38G There are no additional limitations except for those mentioned in Limitations and Differences. 11.38.2 Features Codes on Yealink SIP-T38G This section presents the feature codes for PBX Services accessible during a call specific to the Yealink SIP-T38G Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 3. Press Tran button or Transfer softkey again to transfer the call. You will be disconnected from the call. To Set up a Conference Call You can establish a three-party conference, during the conversation three phone parties can communicate with each other. To establish a conference: 1. Press the Conf softkey or the CONF button during an active call. 2. The first call is placed on hold. You will hear a dial tone.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.39 Yealink VP-2009 11.39.1 Limitations Specific to Yealink VP-2009 In order to make video calls you need to go Quadro’s menu and enable video codec of that extension, on which is set your Yealink VP-2009 phone. There are no additional limitations except for those mentioned in Limitations and Differences. 11.39.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Transfer a Call with Consultation 1. A and B is on an conversation, A press the transfer hot key to put B on hold, then A can dial a new number C and press the OK/SEND button or click button to call out. 2. While C is ringing, A hang up or press the Transfer hot key. Then A will turn to hold status, and the LCD will display as Transferred. 3. You will be disconnected from the call, when C pick up, B can talk to C.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.40 Yealink VP530 11.40.1 Limitations Specific to Yealink VP530 In order to make video calls you need to go Quadro’s menu and enable video codec of that extension, on which is set your Yealink VP530 phone. There are no additional limitations except for those mentioned in Limitations and Differences. 11.40.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Blind Transfer a Call 1. During an active call press hold. or the Transfer softkey, this puts the call in progress on 2. Dial the number to where you want to transfer the call and press the softkey again to complete the transfer. or the Transfer You will be disconnected automatically from both calls. To Transfer a Call with Consultation 1. During an active call press place the active call on hold.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.41 Alcatel Temporis IP 200 11.41.1 Limitations Specific to Alcatel Temporis IP 200 Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.41.2 Features Codes on Alcatel Temporis IP 200 Phone This section presents the feature codes for PBX Services accessible during a call specific to the Alcatel Temporis IP 200 Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To end the three-way conference call, hang up the phone. 11.42 Alcatel Temporis IP 600 11.42.1 Limitations Specific to Alcatel Temporis IP 600 Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.42.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.43 Alcatel Temporis IP 800 11.43.1 Limitations Specific to Alcatel Temporis IP 800 Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.43.2 Features Codes on Alcatel Temporis IP 800 Phone This section presents the feature codes for PBX Services accessible during a call specific to the Alcatel Temporis IP 800 Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.44 AudioCodes 310HD 11.44.1 Limitations Specific to AudioCodes 310HD Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.44.2 Features Codes on AudioCodes 310HD Phone This section presents the feature codes for PBX Services accessible during a call specific to the AudioCodes 310HD Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.45 AudioCodes 320HD 11.45.1 Limitations Specific to AudioCodes 320HD Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.45.2 Features Codes on AudioCodes 320HD Phone This section presents the feature codes for PBX Services accessible during a call specific to the AudioCodes 320HD Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.46 Panasonic KX-UT136 11.46.1 Limitations Specific to Panasonic KX-UT136 Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.46.2 Features Codes on Panasonic KX-UT136 Phone This section presents the feature codes for PBX Services accessible during a call specific to the Panasonic KX-UT136 Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.47 Panasonic KX-UT123 11.47.1 Limitations Specific to Panasonic KX-UT123 Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.47.2 Features Codes on Panasonic KX-UT123 Phone This section presents the feature codes for PBX Services accessible during a call specific to the Panasonic KX-UT123 Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.48 Panasonic KX-TGP550T04 11.48.1 Limitations Specific to Panasonic KX-TGP550T04 Phone There are no additional limitations except for those mentioned in Limitations and Differences. 11.48.2 Features Codes on Panasonic KX-TGP550T04 Phone This section presents the feature codes for PBX Services accessible during a call specific to the Panasonic KX-TGP550T04 Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 11.49 Aastra MBU400 11.49.1 Limitations Specific to Aastra MBU400 There are no additional limitations except for those mentioned in Limitations and Differences. 11.49.2 Features Codes on Aastra MBU400 This section presents the feature codes for PBX Services accessible during a call specific to the Aastra MBU400 Phone and serves as a supplement to Quadro Feature Codes on IP Phones.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List To Transfer a Call with Consultation 1. During an active call, press the Hold softkey. 2. Enter the number to transfer the call to. 3. 4. 5. 6. Press the green key to connect Have your consultation. Press the Options softkey. Select Transfer, and press OK . To Set up a Conference Call 1. While on an active call with a second call on hold, you can connect to both calls at once by conferencing the three calls together.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 12 Appendix 1 This section presents the feature codes for PBX services accessible at the dial tone and Auto Attendant services. 12.1 Establishing a call To establish a call, dial the appropriate Routing Number. The Routing Numbers and the available routes to/from/through Quadro are listed in the Local Routing Table configured and managed by the Quadro’s administrator.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Configuring outgoing call blocking from handset Mark the Last Call as Bad Logs Collecting (this will generate a special user's failure log with the details of the last call for administrator's revision) Easy Login/Logout (used by ACD Agent to easy login or logout to all groups where it is subscribed to) No Answer Call Forwarding Access to the Shared Mailboxes Listen in Whisper Barge in In
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 12.2.1 To Use Busy Auto-redial This service is functional for SIP and PBX calls only. For PSTN calls, this feature works as a single redial with no multiple attempts to reach the called destination. Dial to redial the last number that you called.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Blocking the SIP caller with anonymous caller ID such as anonymous@anonymous or a similar address will result in blocking all SIP callers with unknown caller address. 12.2.6 Call Routing Management Dial , to manage the routing entries in the Call Routing Table, i.e. to enable/disable certain dialing rules by dialing key combinations pre-configured on each routing entry.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 12.2.11 Easy Login/Logout (used by ACD Agent to easy login or logout to all groups where it is subscribed to) See the feature codes . 12.2.12 To Activate and Configure No Answer Call Forwarding Service If preliminarily configured: • dialling will activate the No Answer Call Forwarding service with the settings specified for Any Address on the Caller ID Based Services page (User login Supplementary Services).
Epygi Technologies 12.2.15 Quadro Features on Epygi Tested IP Phones List Intercept Depending on the Call Intercept option configuration in the Extensions Management -> General Settings -> Call Intercept Access List page, you may be capable to use the Call Intercept Feature Code. For Intercept service, press + extension number + #. These feature codes are only available when the extension you dial is in the call.
Epygi Technologies 12.2.16 Quadro Features on Epygi Tested IP Phones List Voice Mail Services Enter Voice Mail Services The Voice Mail Services are divided into two main parts: Voice Mailbox and Review System Messages. Each of these parts has a hierarchy that is described below.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List The Voice Mailbox has the following sub-hierarchy in the Reply or Forward a Message and Send a Message or Leave a Reminder menu options: Reply or Forward a Message Call Back immediately Reply by Voice Mail Forward a Message Dial to mark the message as Urgent, or press pound to assign the Normal priority.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List 12.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List Flash Leaves the Auto Attendant and gets a dial tone Please Note: For more information on Quadro’s Auto Attendant Services, please refer to Manual III: Extension User's Guide of the corresponding release. 12.3.1 Administrator Login The administrator login allows only modification of the auto attendant (AA) greeting message, menu message and Universal Extension Messages.
Epygi Technologies Quadro Features on Epygi Tested IP Phones List THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Epygi Technologies to be accurate as of the date of publication, is subject to change without notice.
