Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 96 - / 109
Choose Phone-> Function Keys -> Line Key, choose one of the keys on which you want
to make the assignment, there is a pull-down menu in the Type field, choose
Conference from the list.
Press Confirm button to save the changes.
Forward
Two use cases can be considered for this function. If a key is configured as Forward
key:
• When you press this key during an incoming call, you will be able to divert this
call directly. Depending on your configuration you will be prompted to enter
target number, or stored value will be used. This function can be used, for
example, to divert certain calls to your voicemail
• When you press it in idle status the IP phone will enter the forward interface.
In this case you will be able to enable CF and set the phone number to which
calls must be forwarded if it had not been set previously. Forward type will be
the latest used.. By pressing the key again CF will be disabled.
To assign the key as Forward via web interface:
1) Choose Phone-> Function Keys -> Line Key, choose one of the keys on which you
want to make the assignment, there is a pull-down menu in the Type field, choose
Forward from the list.
2) Enter the extension number you want to forward to in the Extension field. (For
forward on ringing scenarios)
3) Press Confirm button to save the changes.
Transfer
You are able to configure a key as a transfer key to perform the
Blind/Attended/Semi-Attended Transfer. The main difference with Transfer hard key
is in this case you can pre-configure the number to which transfer will be performed.
This is very useful when there is a limited number of numbers to which you usually
transfer your calls.
To assign the key as Transfer via web interface:
1) Choose Phone-> Function Keys -> Line Key, choose one of the keys on which you
want to make the assignment. From the pull-down menu in the Type field select
Transfer.
2) Enter the Number in the "Value" field. In this case, when you are on a conversation,