Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 89 - / 109
network setting interface.
Press OK key again to enter an AutoP setting interface. Enter the corresponding
contents and press OK key to save the settings or press MENU key return to previous
menu.
If you have pressed OK, autoprovisioning will be launched with the parameters you just
configured.
System Log Export
If some errors happen in your phone, you can export the system log and send it to your
system administrator for diagnosis.
To export the System Log via web interface:
Choose Upgrade->Advanced, select Export System Log, if the type is Local, it will
export the syslog directly; if the type is server, it will export the syslog to the specified
server.
Set the desired debug level for the System Log
Click Export button to export the file
PCAP Trace Export
The PCAP Trace is used to record the data packets at the WAN port of your phone. If
some errors happened in your phone, you can export the PCAP trace and send to your
system administrator for diagnosis.
To export the PCAP Trace via web interface:
Choose Upgrade->Advanced. Select PCAP Trace option, click Start button to launch
Wireshark capture. Click Stop to stop Wireshark capture, and then click Export to export the
file to your local computer.
Keys configuration
Send Key configuration
Admins can set a specific button (“#” or “*”) as the send key. If this feature is enabled,
once you’ve dialed the desired number, you can press this send key to call your
correspondent immediately.