Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 88 - / 109
Zero-Active Interface
Zero-sp-touch function can help users to configure Auto provisioning and network
parameters quickly.
If this feature is enabled, whenever the set powers on or a pre-assigned Function Key
is pressed, the phone will turn to the Zero-Active interface.
Turn on Zero-Active via web interface:
1) Choose Upgrade->Advanced-> Zero Active, in the pull-down menu, choose enable
to turn on this function.
2) Click Confirm to save.
Once the phone enters into Zero-Active interface (at power on or due to a specific
function key press), a countdown screen will be shown first.
If no operation is done nor Cancel key is pressed the phone will revert into normal idle
interface at the end of the countdown.
If OK key is pressed prior to the end of the countdown, the phone will enter into a