Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 86 - / 109
To update the firmware and configuration automatically via Web interface or using the
phone GUI you will need to set up an Autoprovision environment
Note:
Please check with your Technical Support for the Autoprovisioning guide.
To launch Autoprovisioning using web interface:.
1) Choose Upgrade->Advanced. Configure necessary settings: Custom Option,
Custom Option Type, URL, Account, Password, Common AES Key and
MAC-Oriented AES Key, PNP config and Check New Config.
2) Click Confirm button, the phone will check the server for a new firmware in a
specific time, and will update automatically if there is new firmware.
3) You can also update the firmware immediately by pressing Autoprovision button.
Set Auto Provision via phone interface:
Go to ->3.Settings->2.Advanced ->7. Auto Provision->OK.
Enter the URL, User Name and Password (optional).
Click OK key to save the changes and launch Autoprovision.
Note:
1. Any power interruption during the subsequent process will most likely lead to a
flash memory error. As a result the system cannot boot up anymore. The procedure
can be only conducted in Administrator Mode.
2. If the updating is failed, you can re-plug the power adaptor, and press the Speaker
key for 3 seconds, the IP phone will enter the account configuration interface. Users
can reconfigure the IP phone account information here, and then press the OK
button to save the changes.
3. The upgrade priority is PNP, Custom Option, DHCP options, preconfigured URL .
4.
Decryption
Your Temporis IP 200 supports configuration file encryption for provisioning. In case
encryption is used, AES key needs to be configured on the phone.