Specifications

Temporis IP 200 Administrator Guide ed 1.0 - 81 - / 109
interface such as: Accounts, Network, Reset to Factory, other advance phone settings.
VAR mode grants access to subset of Administrator functions (Login and password are
var/var).
Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator/user password is used to access:
Web interface.
The advanced settings of the phone such as Network, Account, Reset to Factory
Settings via the Phone interface.
The default administrator password is admin. Meanwhile the user name for Web
interface access is admin.
To change the administrator password via Phone interface:
1) Make sure active User Type is admin
2) Press ->3.Settings->2.Advanced->OK->5.Set Password->OK.
3) You are prompted to enter the Current PWD, New PWD and Confirm PWD, Press
to change the input method.
4) Press OK button to confirm the change, or MENU to return to previous menu.
To change the administrator password via Web interface:
Choose Security->Password->admin, enter the Current, New and Confirm password,
click Confirm button to save the changes, or Cancel button to cancel the changes.
To logout via Web interface:
Click the Logout button in the top right corner.
Reboot
You should reboot the phone when you are asked to, e.g. after applying specific
changes to phone configuration.
To reboot via Web interface:
1) Go to Upgrade->Basic.
2) Click Reboot button.